Zt 42 B 1,2 Rapid Actuator With Opening And Closing Lock Aprimatic 41008/004

ZT 42 B 1.2 RAPID ACTUATOR WITH OPENING AND CLOSING BLOCK APRIMATIC 41008/004

Device for regulating the opening and closing speed of the gate, by regulating the oil flow through valves. The device allows you to regulate unbalanced loads that can occur in the event of wind, leaves that are out of alignment or non-standard leaves (very light or heavy). Hydraulic closing slowdown system, adjustable during installation, allows a smooth approach of the gate leaves which avoids noise and mechanical stress on the structure. Anti-crushing system made with very sensitive bypass valves, calibrated during installation, which limit the hydraulic pressure in the event of an obstacle, ensuring maximum safety of the system. Emergency release for valid anti-intrusion protection thanks to the personalized key. It is protected inside the upper hood and does not alter the pleasant aesthetic line of the actuator. The rear flange, with articulated movement aluminum fork, guarantees extreme robustness and flexibility when mounting on the pillar. The front attachment is a uniball type ball joint. A 20 mm thread is useful during the installation phase to recover any tolerances caused by the fixing. Power cable, made of neoprene, specific for mobile installation in outdoor environments.

Form 41008/004

MAINS POWER SUPPLY 230 V - 50 Hz
ABSORBED POWER 250 W
MAX. DOOR WIDTH WITHOUT ELECTRIC LOCK 1.2 m
MAX. NUMBER OF CYCLES 800 cycles/day
PROTECTION RATING IP55
THRUST FORCE 3850 N
SLOWDOWN IN CLOSING
OPENING TIME 13 s
TEMP. OPERATING MODE -20° +70°
ROD STROKE 190 mm
ACTUATOR WEIGHT 7.5 kg
ANTI-CRUSH By-pass valves