Zf1 Electronic Board For 3119Zf1 Came Motors Gate Automation 88001-0067

ZF1 electronic board for 3119ZF1 CAME motors for gate automation

The ZF1 control card is suitable for controlling swing gate automations of the ATI, FERNI, FAST, KRONO series, powered by 230V with power up to 320W, frequency 5060 Hz. Designed and built entirely by CAME SPA, it complies with current safety standards . The card must be inserted into the ABS container (S4339 or S4340), with IP54 protection rating, equipped with an air recycling socket and relative transformer. The board must be powered at 230V (ac) on terminals L1 and L2, and protected at input with a 5A fuse, while the low voltage accessories (24V) are protected with a 3.15A fuse. The total power of the accessories (24V) must not exceed 20W. Safety The photocells can be connected and set up for: - Reopening during the closing phase (2-C1), the photocells, detecting an obstacle during the closing phase of the gate, cause the direction to reverse until it is completely opened; - Total stop (1-2), stopping the gate with the exclusion of the automatic closing cycle, to resume gate movement, use the pushbutton panel or the radio control; Optional accessories - 12V electric lock (ES-ES); - Open gate warning light (3W max.). Lamp that signals the open position of the gate, it goes off when the gate closes at the end of the working time (5-10). Other functions - Automatic closing. The automatic closing timer powers itself at the end of the working time and opens. The preset time is adjustable, in any case subject to the intervention of any safety accessories and is excluded after a "stop" intervention or in the absence of electricity; - "Man present". Gate operation by keeping the button pressed (excludes the radio control function). It is enabled when the TL trimmer is set to minimum. Adjustments: Automatic closing time; Motor 2 closing delay time; Work time.

Model ZF1