Shipping
Description
Electronic timed dimmer module, 300W, Radio UP system, built-in, with neutral
Mod. 4820408
SKU: 4820408
The MTV300E-UP built-in radio module is a timed electronic dimmer, which allows the management of brightness variations from 3% to 100% on loads up to 300W, with a variation principle through interruption at the beginning or end of the phase, with automatic recognition of the type of load: it is compatible with various loads, including incandescent lamps, 230V LEDs and dimmable halogens.
The MTV300E-UP dimmer module can be centralized via Zigbee radio.
It supports the management of multiple variation levels, which can be recalled with short presses: 1 press for 100% brightness, 2 presses to recall the last brightness level, 3 presses for 50% brightness, 4 presses to recall the minimum brightness level (preset).
The module is timed, from 2 seconds to 4 hours, with a shutdown warning and an extended duration, which extends the timing up to 12 hours. It also includes the courtesy night light function for children that allows you to obtain a light intensity of 20% that will decrease in an hour until leaving only a courtesy light (in 12 hours). It also allows you to activate the light signals of corridors or other rooms for night-time movements.
The module can be programmed to function as a simple step relay or for applications for the deaf and hard of hearing, using light for visual signaling.
Thanks to the "soft start / soft stop" function, it limits the inrush current during the switch-on phase of the light load, thus increasing the life of the lamp and buttons.
The module has 2 types of integrated electronic protections: in case of short circuit on the load (with automatic recovery after the fault is eliminated) and against overheating. It is also immune to network disturbances up to 1.5 kV.
If the system includes GATE-UP, the module can also be managed via the YnO UP App, both locally and remotely, and can be managed in automatic mode by defining scenarios.
Programming the module is very simple: either through a directly connected button or through the U2PRO Installer application.
Accessories:
SMARTCHR (code 5454089): Resistive load for energy saving bulbs and LEDs
• Mains voltage: 230 V~ (± 15%) - 50 Hz
• Power on load: 1.3A - 300W (resistive); 0.6A - 125VA (other loads)
• Stand-by consumption: < 0.8VA - < 0.4W
• Ambient temperature: -20°C + 40°C
• Relative humidity: 0 to 90%
• IP protection rating: IP30
• Range: 250m in a clear and unobstructed field of view. Range reduction in the presence of metal elements, crossing walls or bulkheads
• Radio protocol: Zigbee
• Maximum transmitted radio power: 10 mW
• Radio frequency band: 2400.0 - 2483.5 MHz
• Dimensions (LxHxD): 40 x 45.7 x 13.1 mm
24 month warranty
eb: 235622385515
