Sintap Anti-theft Rolling Shutter 3 Sensors Cord Shutters Securvera Ss-sal2ccscia

Sintap Anti-theft Roller Shutter 3 Sensors Cord Shutters Pulse Counter Processor - SS-SAL2CCSCIA

Mod. SS-SAL2CCSCIA

SKU: SS-SAL2CCSCIA

FAST PULSE COUNTER FOR ALARM SWITCH SINTAP ROLLER ALARM COMPONENT

SV-MSI Counter module of: NC and NO fast electrical pulses, can check the continuity of the line. Using the Jumper, you can program from 1 to 8 very short pulses (less than 500 mS), the counting ends with the intervention of the relay. Utility: analysis of the SS-SAL switchalarm, as well as any other sensor, if programmed with 2 or more pulses, must receive at least 2 pulses within eight minutes to generate an alarm. Counting system with autoreset, it intervenes after 8 minutes without any other impulses arriving. It is programmed: for pulse counting only without checking the integrity of the line, suitable for unsafe contacts that could remain open; or with line integrity control. It could be used to check that multiple sensors (infrared, photocells, dual technologies) go into alarm simultaneously, or consecutively, to control an entrance or a path, but also to avoid false alarms from sensors that are too rapid. Power supply 12 V. Relay output 1 exchange 1 A 24 V. Dimensions L70XL55XH14 mm. Weight 23 g. Product assembled in the Securvera Roma factory. Guaranteed by law against defects and manufacturing defects.

SS-SAL Switchalarm NC mechanical contact. The system is operated by a nylon cord with a length of approximately 2.7 to 3 meters (determined mechanically). Wrapped and sliding on pulleys. The sliding of the cord causes the contact to open for approximately 50 mS. (requires the SV-MSI pulse counting amplifier). Suitable for roller shutters and shutters, it protects them: from cutting, tearing and lifting. Dimensions L102XL90XS16 mm. Weight 30 gr. Product assembled in the Securvera Roma factory. Guaranteed by law against defects and manufacturing defects.


Model: SV-MSI Pulse Counter for Anti-theft Switchalarm
Advice: Read the characteristics and components carefully
Factory: Securvera Anti-theft Signal Counter Rome Italy
Usage: Counts Amplifies Discriminates Sensor Alarm Signals
Pattern: Download the Pattern Search for it in the Written Page Center
System: Relay Excitation Programming Signal Input
Instructions: Find the words "CLICK TO GET THE GUIDE"
Compatible: Burglar alarms operating at 12 V. CE Italian sensors
Warning: WE DO NOT SHIP TO THE MINOR ISLANDS AND ABROAD
Specifications: Pulse Counter Vibration Sensor Fast Pulses
Payment: STATE DEDUCTIONS ONLY TRACEABLE BANK TRANSFER
Technology: Detect Fast Pulses Check Line Integrity
Device: Fast Pulses of Counting Lanyard Contacts
Device: Programmable Fast Alarm Pulse Count


CLICK HERE TO DOWNLOAD THE PRACTICAL DIY GUIDE:
MANUFACTURER'S MANUAL

24 month warranty