Shipping
Shipping in 7-10 business days
Description
Outdoor side-view dual PIR detector
SKU: BXS-RAM-W
Features
• Outdoor side-view dual PIR detector
• 12 m coverage per side
• Active IR anti-masking
• Can be connected to a CCTV camera to send visual alarms
• Advanced SMDA processing logic
• 4 detection zones (2 per side)
• Detection range adjustable across 5 levels
• Sensitivity adjustable across 3 levels
• Independent alarm outputs for each side, fault/tamper output, and anti-tamper switch
• Dual conductive mesh (patented) to prevent interference
• IP55
• Self-powered by 3V~9V DC lithium or alkaline batteries, or by a wireless transmitter.
Specifications
Features
• Outdoor side-view dual PIR detector
• Side-view detection with dual sensors on each side
• Can be connected to a CCTV camera to send a visual alarm when an intruder is detected
• 4-PIR technology: detection range, sensitivity, and alarm output can be configured independently on each side
• Active IR anti-masking
• 12-meter coverage on each side
• Angle relative to the wall adjustable to 0° or 3°
• 2 detection zones on each side
• Detection range adjustable across 5 levels (2.5/3.5/6/8.5/12 meters)
• Mounting height from 0.8 ~ 1.2 meters
• Adjustable sensitivity on each side (extra-high and normal)
• SMDA (Super Multi-Dimension Analysis) processing logic to prevent false alarms caused by vegetation and adverse weather conditions
• Quick-closing front cover, push-fit, and automatic walk test (3 minutes) when the cover is closed
• Right-side alarm relay: NC/NO (10V DC, 0.01A, individual, right or general)
• Left-side alarm relay: NC/NO (10V DC, 0.01A, individual, left or general)
• Fault/tamper output: NC/NO (10V DC, 0.01A)
• Built-in rear tamper
• Dual conductive mesh protection
• Built-in spirit level for quick and precise installation
• Easy visual identification of all adjustment elements (marked in blue on the detector)
• Quick opening by turning the bottom screw 90 degrees
• Includes a protected compartment at the rear to house the wireless transmitter
• IP55 rating
• Operating temperature from -30°C ~ +60°C
• Powered by 3V~9V DC lithium or alkaline batteries (not included)
• Compatible batteries: CR123A x3, 1/2AA x3 or x6, CR2 x3
• Battery holder: OPTEX-42 (RBB-01)
• It is recommended to power it from the battery of the wireless transmitter used
• Maximum consumption: 8mA
• Dimensions: 199.7 x 92.8 x 98.7 mm
• Weight: 550 g
24-month warranty
eb: 227319874286
