Shipping
shipping in 10 working days
Description
CORAL 1051 fully concealed hydraulic bollard
• Designed and built
to regulate and prohibit private vehicle passages, driveways, car parks and accesses
urban in general.
Column diameter 100 mm. Available in various column heights; Also
with LEDs. Rubber edge protector on the lid.
• Hydraulics
quick and easy access to the hydraulic unit and to the hydraulic piston.
Manual release with key to lower the column. Tested for use
intensive even at low or high temperatures. Simplified maintenance.
• Simple and fast installation
thanks to the low weight and the containment formwork, it does not require any particulars
excavations or building works. Each electric cable is 10 m long (standard).
• Versatile
wide range of command accessories (transmitters, tags, numeric keypads,
etc.) and safety (magnetic loop detector, traffic lights, etc.) to ensure a
efficient and accurate control of the plants.
The ELPRO S40 electronic programmer manages up to four bollards
simultaneously.
Model CORAL 1051
Column diameter: Ø 100 mm
Column thickness: 5 mm
Column height: 500 mm
Column material: Fe 360 steel
Column finish: RAL 7016 polyester powder paint
Formwork: hot dip galvanized
Rise time: ~4.7s
Fall time: ~4.4s
Operating temperature: -20°C +80°C (*)
Type of oil: Oil FADINI cod. 708L
Supply voltage: 230 Vac - 50 Hz
Power Consumption: 330W
Current consumption: 1.8A
Output power: 0.25 kW (0.33 HP)
Hydraulic unit protection degree: IP 67
Frequency of use: intensive
Impact resistance: 30,000 J
Breakthrough resistance: 150,000 J
Weight: 86kg
Column diameter (mm): 100
Height (mm): 500
Limit switch: column lowered/raised
Column finish: Ral 7016 Anthracite Grey
Signaling LED: Yes
Solenoid valve (24 Vdc): Yes
NOTE: Retractable post operated by hydraulic piston, with built-in hydraulic unit. 230 V power supply, 10 m of electric cables.
Column in Fe steel with cataphoresis treatment and polyester powder coating. Approved retro-reflective sticker.
Special key supplied for manually lowering the column.
All models are already equipped with the wall formwork, in hot-dip galvanized steel. The piston-hydraulic unit containment group is
treated with electrolytic zinc plating.
For each bollard with solenoid valve, the 24 V voltage stabilizer must be provided, cod. 9321L.
24 months warranty
