Shipping
shipping in 10 working days
Description
CORAL 1051 fully concealed hydraulic bollard
• Designed and built
to regulate and prohibit private vehicle passages, driveways, car parks and accesses
urban in general.
Column diameter 100 mm. Available in various column heights; Also
with LEDs. Rubber edge protector on the lid.
• Hydraulics
quick and easy access to the hydraulic unit and to the hydraulic piston.
Manual release with key to lower the column. Tested for use
intensive even at low or high temperatures. Simplified maintenance.
• Simple and fast installation
thanks to its low weight and containment formwork, it does not require any details
excavations or building works. Each electrical cable is 10 m long (standard).
• Versatile
wide range of control accessories (transmitters, tags, numeric keypads,
etc.) and safety (magnetic loop detector, traffic lights, etc.) to guarantee a
efficient and accurate control of the plants.
The ELPRO S40 electronic programmer manages up to four bollards
simultaneously.
Mod. CORAL 1051
Column diameter: Ø 100 mm
Column thickness: 5 mm
Column height: 500 mm
Column material: Fe 360 steel
Column finish: RAL 7016 polyester powder paint
Formwork: hot dip galvanized
Rise time: ~4.7 s
Descent time: ~ 4.4 s
Operating temperature: -20 °C +80 °C (*)
Type of oil: Oil FADINI cod. 708L
Power supply voltage: 230 Vac - 50 Hz
Power Consumption: 330W
Current absorbed: 1.8 A
Output power: 0.25 kW (0.33 HP)
Hydraulic unit protection degree: IP 67
Frequency of use: intensive
Impact resistance: 30,000 J
Breakthrough resistance: 150,000 J
Weight: 86kg
Column diameter (mm): 100
Height (mm): 500
Limit switch: column lowered/raised
Column finish: Ral 7016 Anthracite Grey
Signaling LED: Yes
Solenoid valve (24 Vdc): No
NOTE: Retractable column operated by a hydraulic piston, with built-in hydraulic control unit. 230 V power supply, 10 m of electrical cables.
Cataphoresis treated Fe steel column and polyester powder painting. Approved retro-reflective sticker.
Special key supplied for lowering the column manually.
All models are already equipped with the wall formwork, in hot-dip galvanized steel. The piston-hydraulic unit containment group is
treated with electrolytic galvanization.
For each bollard with solenoid valve, a 24 V voltage stabilizer, code 9321L.
24 month warranty
