Shipping
shipping in 2-4 business days
Description
Remote control
RIB
SUN 2CH
2-channel
ORIGINAL
replaces the MOON model
RIB SUN433 remote control 2 buttons, frequency 433.92 Mhz Blue led light,
comes with a 23A-12Vdc type battery
RIB SUN 433 2-button radio control, frequency 433.92 MHz, blue LED light,
self-learning coding between remote controls.
Instructions are provided for setting the code from the dip switch.
This model replaces the previous remote control RIB MOON ch2, and is 100% compatible.
STARTING FROM AN OLD RIB MOON MODEL
1. Open the already functioning radio control
2. On the board there are mini switches numbered from
1 to 10, positioned on ON or OFF which determine the code of the
radio control
3. Press button 1 of the new radio control e for an instant
release it
4. Within 2 seconds, press the second key and hold it
pressed for 5 seconds Release the button
5. The remote control LED turns on with a steady light and then
a few seconds it turns off
6. Play the code of the old transmitter by pressing i
buttons 1 and 2 of the new remote control: button 1 represents
OFF while key 2 represents ON
7. After having reproduced the code the radio control LED
will remain lit for 3 seconds to indicate that the procedure is
went well
STARTING FROM A RIB SUN
1. Press and release the key
programming on the board
receiving.
(P, PG, PROG, M, REC, CH1, ENR, MEMO)
2. Press and hold
the button of the new remote control
for 5 seconds
3. Wait 15 seconds and try
to operate the automation for
check its correct functioning
24 months warranty
