Shipping
shipping in 2-4 business days
Description
NICE
Robus kit 400
RB400BDKCE
For sliding gates up to 400 kg
Simple: thanks to the BlueBUS system that allows
two-wire connections only between the control unit and
up to 7 pairs of photocells, control, safety and signaling devices.
Practical: control unit and PS124 buffer batteries
(optional) housed inside Robus, connectable
via convenient guided plug-in connector.
Advanced: RB400 is equipped with a temperature sensor
which adapts the engine strength to the climatic conditions
while adapting the thermal protection at the same time. A
master/slave selection synchronizes automatically
also 2 motors, allowing the automation of gates
sliding doors with two opposing doors.
Intelligent: thanks to obstacle detection and automatic programming of working times.
Self-diagnosis with warning through the flashing light.
8 programming levels.
Safe: adjustable acceleration and deceleration at the start and end of each manoeuvre.
Robust: aluminum base and release with easy-opening handle.
Silent: gearmotor on bearings.
Era Gate accessories, with a design
minimal, modern and discreet, they renew the aesthetics and performance of the Nice kits.
The kit contains:
RB400
1 irreversible electromechanical gearmotor,
with built-in control unit and OXI plug-in receiver for connection via Nice BUS.
ON3BD 2 2-channel 433.92 MHz transmitter.
EPMB 1 Pair of outdoor photocells designed for connection via Nice BlueBUS.
ELDC 1 LED flashing light with integrated antenna.
TS 1 Signage table.
RB400KCE Kit for the automation of sliding gates up to 400 kg. 24 Vdc
ELECTRICAL DATA
Power supply (Vac 50/60 Hz) 230
Absorption (A) 2.5
Power (W) 515
PERFORMANCE DATA
Speed (m/s) 0.31
Force (N) 400
Work cycle (cycles/hour) 40
DIMENSIONAL AND GENERIC DATA
Degree of protection (IP) 44
Operating temperature (°C Min/Max) -20 ÷ +50
Dimensions (mm) 330x210x303 h
Weight (kg) 11
24 month warranty
