Shipping
shipping in 2-4 business days
Description
Complete Kit for Automation
for Doors with Counterweights
Intensive use
QUICK ASSEMBLY SYSTEM
Professional
+ OBSTACLE DETECTOR
+ OPTICAL ENCODER
UNIKO model 100kg
From the top of technology
UNIKO is an electromechanical ceiling actuator with a modern design,
for spring or sectional doors.
Available in two models:
For residential use (UNIKO 70).
For condominium use (UNIKO 100).
A high technological value is concentrated in this product which gives the product numerous qualities:
Compact dimensions (360 x 200 x 120 mm).
Installation times reduced by 40%.
Base in sturdy plastic material which reduces the weight of the operator and makes it easier to handle.
Prepared for the use of low consumption lamps.
UNIKO 70KG UNIKO 100KG
MOTOR POWER SUPPLY 24 Vdc24 Vdc
MAX THRUST 700 N 1000 N
MAX CAPACITY DIMENSION 10 MQ14 MQ
ENGINE RPM 200 RPM 200 RPM ENCODER
AVERAGE ABSORPTION 0.7 TO 1.2 A
PINION1/2 X1/8 Z9 PITCH 8 Z121/2 X1/8 Z9 PITCH 8 Z12
NOISE LEVEL < 30 DBA < 30 DBA
OPERATING TEMPERATURE -20/55°C -20/55°C
PROTECTION DEGREE IP30IP30
PATENTED THREE-STEP ASSEMBLY:
UNIKO can be assembled in three steps on the appropriate track without the use of tools.
1-Mount the support plate on the track by screwing the two bolts and fixing the lower part.
2-Take the operator, engage the shaft and rotate.
3-Insert the plug.
To disassemble it, a screwdriver is enough to push the plug out.
CLICK ON THE LINK FOR THE PDF MANUAL:
MANUFACTURER'S MECHANICAL PART MANUAL
MANUFACTURER'S ELECTRONICS MANUAL
KIT COMPOSITION:
n° 1 24V low voltage gearmotor kit, max capacity 100kg, built-in limit switch.
n° 1 control unit located in the motor crankcase, with motor force adjustment trimmer and ENCODER,
slowdown in opening and closing, 4 operating logics: step-by-step, semi-automatic 1 and 2, condominium automatic.
Courtesy light, protection against overvoltages, input for photocells, safety edges and buffer battery.
n° 1 Single-channel radio receiver incorporated in the control unit (433.9 MHz)
n° 1 Antenna incorporated into the control unit, range 30 meters (433.9 MHz)
n° 1 4-channel ROLLING CODE remote control
n° 1 treated aluminum sliding guide with 3m chain
n° 1 Swinging arm for counterweight doors
n° 1 Internal emergency release
n° 1 Courtesy light
n° 1 Set of screws and brackets for assembly
n° 1 Assembly instructions for the mechanical and electronic parts in ITALIAN
24 months warranty
