Shipping
shipping in 10 working days
Description
ELECTROMECHANICAL OPERATOR APRIBOX 700N APRIMATIC 41241/001
Maximum anti-crushing safety thanks to the on-board electronic control equipment equipped with a closing motion reversal function in the event of an obstacle and the use of sensitive edges. APRIBOX 700 and 1200 KITS can be used for sectional doors and, if installed with the adapter arm accessory, also to automate overhead doors. Slow-down system that allows the door to move smoothly together during the opening and closing phases, avoiding noise and mechanical stress on the structure. Timed courtesy light incorporated in the actuator which illuminates the garage during the opening and closing phases. The pre-assembled guides optimize installation times, while the encoder stroke control reduces the programming phase to a minimum. Silence and resistance guaranteed by the belt motion transmission. Continuity of service guaranteed, in the event of a power failure, by a group of optional batteries that can be inserted on board the actuator. Possibility of manual operation via release system (optional).
Form 41241/001
MAINS POWER SUPPLY 230 Vac - 50/60 Hz
MOTOR POWER SUPPLY 24 Vdc
TRACTION FORCE 650 N
MAX. COVER DIMENSION 10 m2
PROTECTION RATING IP40
POWER 100 W
TEMP. OPERATION -20°C +55°C
LINEAR SPEED AT NO LOAD Adjustable from 9 to 16 cm/sec.
TOWING SYSTEM Belt
GUIDE LENGTH 3000 mm
USEFUL STROKE (3 M. GUIDE) 2450 mm
MINIMUM INSTALLATION DISTANCE FROM THE CEILING 40 mm
LIMIT SWITCH Encoder with mechanical limit switches
