Shipping
shipping in 2-4 business days
Description
ELECTROMECHANICAL UNIT WITH 24 VDC MOTOR
SELF-LOCKING SLAVE AUTOMATION
Mod. BL824S (EX 200/BL824S)
Controlled via encoder
"Slave" automation.
Actuator arm to be ordered separately.
Self-locking master automation
24 Vdc motor power supply
Max. weight door 200 kg
Max. opening 130°
Built-in electronic programmer
A complete automation for single or double-leaf swing closures, it is made up of a master device with built-in programmer and a slave for the automation of the second leaf slaved to the first. Particularly suitable for gates with reduced base pillars up to 150 mm wide. Also ideal for gates with hinges offset from the pillar edge and with leaves up to 2 meters in length and 200 kg in weight. Its installation is extremely facilitated by the special wall fixing plate (or pillar), made of die-cast aluminium, it is designed for any type of fixing and offers a solid anchoring to the gearmotor.
The robust and compact fixing base allows the automation to be applied even on small pillars. The motion transfer arms made of die-cast aluminum are extremely robust and equipped with joints suitable for every type of application, which is why they allow you to move swing gates with different construction characteristics.
The electronic equipment (integrated into the master automation) is of new generation and controls the position of the leaf via encoder. Programming is self-learning. Repositioning (if extraneous events occur on the travel of the door) occurs automatically. The control operated by the control unit is completed with anti-crushing safety devices and "soft start" and "soft stop" functions.
Furthermore, the control electronics are equipped with a backlit graphic LCD display (128 x 128 pixels) in six different languages which allows the display, via menu, of all the functions in progress, the reading of the number of maneuvers carried out by the automation and rapid setting of system parameters via menus including dynamic button mode, automatic reclosing, pre-flashing, intermittent activation of the flashing light, operating mode of the warning light and photocells and enabling of the electric lock etc.
The master equipment is supplied as standard with the radio module for remote control (S449 system), battery charger and buffer batteries which allows the implementation of one or more maneuvers in the event of a lack of mains voltage.
Manual unlocking is carried out with the supplied hexagonal key, placed inside the side cover.
TECHNICAL SPECIFICATIONS OF THE ACTUATOR
24 Vdc power supply
Absorption A 2
Power consumption W 50
Intermittent work % 70
Opening time 90° s 14 (12*)
Maximum opening ° 130
Torque Nm 270
IP 44 protection rating
* with the use of the straight arm
TECHNICAL SPECIFICATIONS OF THE CONTROL UNIT
Vac 230 power supply
Rated current A 1.2
Max. absorbed power W 250
Output power for 1 or 2 motors: W 60 + 60
Cls II class device
BUILT-IN RECEIVER
S449 MHz reception frequency 433.92
Number of channels No. 4
Number of manageable functions No. 6
Number of codes that can be stored No. 300
24 month warranty
