Shipping
shipping in 2-4 business days
Description
Control unit for 24V swing gates
with 433.92 MHz Receiver
Professional
with Box and Transformer
+ N 2 4-channel remote controls
UNIVERSAL
SUITABLE FOR ALL AUTOMATIONS
1. GENERAL INFORMATION
The self-learning universal control unit was designed for the automation of access to 1 or 2 24V motors and is equipped with an innovative self-learning procedure for rapid installation and four trimmers for fine adjustment of the main parameters; force, pause time, obstacle control sensitivity and closing lag between the two motors.
CLICK ON THE LINK FOR THE INSTRUCTION MANUAL:
MANUFACTURER'S INSTRUCTION MANUAL
Are available:
- rapid self-learning programming, in which the control unit automatically carries out the learning maneuver of the maneuver times and sets the start of the slowdown both during opening and closing at 90% of the manoeuvre.
- professional programming in which the installer can determine the starting moment of the slowdown of the leaves, the enabling of pedestrian opening via radio, the intervention mode of the safety devices.
2. MAIN FEATURES
• Command and control of automated accesses with 1 or 2 24V motors (max 1/2 Hp)
• Simplified and professional self-learning procedure for the acquisition of: maneuver and slowdown times, and the presence of safety devices.
• Motor force adjustable via trimmer from 50-100%.
• Customizable partial (pedestrian) opening
• Dwell time adjustable via trimmer from 0 to 60 seconds.
• Obstacle control intervention time adjustable via trimmer between 0.1 and 3.0 seconds.
• Closing motor phase shift adjustable via trimmer between 3 and 30 seconds
• 12V 15W electric lock management
• Courtesy light management
• Built-in 433MHz receiver
• 255 storable radio codes
• On-board reprogrammable Flash microprocessor via serial interface.
• Complies with the relevant European Directives: R&TTE 99/05/EC
3. TECHNICAL CHARACTERISTICS
Central power supply: 230VAC
Engine output: 2 x 1/2Hp
Motor current: Max 8 Ampere
Accessory power supply: 24 VDC - 750 mA
Operating temperature: -20°C / + 55 °C
Programming parameters: stored in EE-PROM
Function manager: microprocessor with watch-dog
24 month warranty
