How to properly connect the electric brake to the garage door's blind pin?
Properly connecting the electric brake to the garage door's blind pin is a crucial step to ensure safe and effective operation of the opening and closing system. In this guide, you will find detailed steps to correctly perform the connection.
Necessary materials
- Electric brake
- Garage door blind pin
- Black sheath
- Steel cable
- Cable tensioner and bolts
- Nutted pin
Connection steps
Follow these steps carefully to connect the electric brake to the garage door's blind pin:
- Secure the cable: Start by fully screwing the tensioner located above the electric brake. Make sure the steel cable is taut.
- Connect to the blind pin: Bring the cable to the blind pin and install the nutted pin. Ensure it is positioned in the release phase to prevent accidental door unlocking.
- Adjust the tension: Tighten the bolt above the electric brake until reaching the desired release point.
- Lock the locknut: After setting the tension, lock the locknut to keep the configuration stable.
- Set the lever: Lower the blind pin's lever; this will be your unlocking point.
Final considerations
Make sure to follow these steps carefully to perform a safe and correct connection of the electric brake to the garage door's blind pin. A good connection not only improves system functionality but also helps ensure safe access to the garage. Acting precisely, you can maximize your automation system, offering greater protection and convenience.
