How can I synchronize the opening of two garage shutters at the same time?
Synchronizing the opening of two garage shutters is a relatively simple operation, provided you have the right equipment and knowledge of the control units. Each shutter is equipped with its own control unit, which means you will need to work on each one to achieve the desired result.
Synchronization options
There are two main methods to synchronize the control of the shutters:
- Parallel button control: This option involves connecting a button that acts simultaneously on both control units. In this way, when you press the button, both shutters will open at the same time.
- Use of an external receiver: Another solution is to install an external receiver that can be programmed to send an open signal to both control units. This option is particularly useful if you want to further automate the process.
Steps for synchronization
Here are the steps to follow to synchronize the garage shutters' opening:
- Identify the control units of the shutters.
- Decide which synchronization method you will use (parallel button or external receiver).
- If you choose the button, connect the button to the start inputs of the control units.
- If you opt for the receiver, install it according to the manufacturer's instructions and connect it to the control units.
- Test the system to ensure that both shutters open and close simultaneously.
Final considerations
Synchronizing the opening of two garage shutters at the same time is an effective way to improve efficiency and convenience. Choose the method that best suits your needs and proceed carefully by following the steps outlined above. With the right equipment and a little patience, you can enjoy the convenience of a coordinated opening system.
