Shipping
Description
Electronic timed dimmer module, 500W, Radio Power system, built-in, with neutral
Mod. 5454457
SKU: 5454457
The MTV500ERP built-in radio module is a timed electronic dimmer, which allows the management of brightness variations from 3% to 100% on loads up to 500W, with a variation principle through interruption at the beginning or end of the phase, with automatic recognition of the type of load: it is compatible with various loads, including incandescent lamps, 230V LEDs and dimmable halogens.
The MTV500ERP dimmer module can be centralized via Yokis Radio Bus.
It supports the management of multiple variation levels, which can be recalled with short presses: 1 press for 100% brightness, 2 presses to recall the last brightness level, 3 presses for 50% brightness, 4 presses to recall the minimum brightness level (preset).
The module is timed, from 2 seconds to 4 hours, with a shutdown warning and an extended duration, which extends the timing up to 12 hours. It also includes the night light function for children that allows you to obtain a light intensity of 20% that will decrease in an hour until leaving only a courtesy light (for 12 hours). It also allows you to activate the light signals of corridors or other rooms for night-time movements.
The module can be programmed to function as a simple step relay or for applications for the deaf and hard of hearing, using light for visual signaling.
Thanks to the "soft start / soft stop" function, it limits the inrush current during the switch-on phase of the light load, thus increasing the life of the lamp and buttons.
The module has 2 types of integrated electronic protections: in case of short circuit on the load (with automatic recovery after the fault has been eliminated) and against overheating. It is also immune to network disturbances up to 1.5 kV.
If the system includes the Yokis Hub, the module can also be managed via the YnO App, both locally and remotely, and can be managed automatically by defining scenarios.
Programming the module is very simple: either through a directly connected button or through the YokisPRO Installer application.
Accessories:
SMARTCHR (code 5454089): Resistive load for energy saving bulbs and LEDs
• Mains voltage: 230V ~ (+10% - 15%) - 50Hz
• Power: min. 5VA max. 500VA (300VA in watertight boxes)
• Maximum current: 1.3A / 2.2A waterproof boxes: 1.3A /300VA other boxes: 2.2A /500VA
• Ambient temperature: -20°C + 40°C
• Relative humidity: 0 to 90%
• Dimensions (LxHxD): 37 x 46 (+25) x 12 mm
24 month warranty
eb: 375502805671
