Sapiens Remote Control Fits Rolling Code Genius Casali Bravo Faac XT Rc Echo

UNIVERSAL MULTI-FREQUENCY RADIO CONTROL

SAPIENS

List of duplicable rolling code models:

APRIMATIC: Tr2/4, TX2/4M, TM4

BFT: MITTO2/4, TRC2/4, B RCB 2/4, KLEIO TX2/4, RB

BENINCA: To-Go 2/4 WV, T2/4WV, Cupido 2/4, Apple4WV, IO

FAAC: RC

FADINI: Juby small, juby433

GiBiDi: DOMINO AU1600/1610/1680/1810

MHOUSE: TX3, TX4, MT4, GTX4

NICE: SMILE

SEAV : BE HAPPY RS3, RS2, RS1, RH1, RH2, RH3

SUMMER/OPEN: 434.42/868.84 FM

V2 : PHOENIX black and red - PHOX 433/868

SAPIENS is a latest generation radio control with a new processor and new memory, this technology allows the programming of latest generation rolling code remote controls (see compatibility table) and traditional 433.92 MHz fixed code models, and to be inserted into the same device , effectively creating a unified gate transmitter.

Simple to program.

Programming is simple and immediate, because it uses the same buttons as the remote control for the code learning procedure (you will not have to set any levers).

Each button on the PANDIS R Full-F2 accepts different frequencies as well as different rolling codes and fixed codes.

Characteristics:

Copyable frequencies: 434-FM, 433.92, 868, 270-390 Mhz

Accepted coding: fixed codes, rolling codes.

Number of programmable keys: 4

Type of programming: Self-learning between remote controls and wireless controls on the front of the gate

(without accessing the control unit).

Power supply: 3V CR2032 lithium button battery (210mAh) included in the remote control. 

Accessories supplied: Carabiner key ring, programming manual.

ROLLING CODE REMOTE CONTROL FOR OPENING AND SELF-LEARNING.

1) Press keys 1 and 3 (1 and 2 if FM) simultaneously for approximately 3 sec. until the SAPIENS green LED changes its flashing from slow to fast, then release the keys.

2) Press and release the button on which you want to memorize the original remote control, the LED lights up steadily and changes its color from green to orange.

3) Transmit by pressing the desired button on the original remote control at a distance of 10 cm until the SAPIENS LED changes its color from orange to green and emits 3 slow flashes for fixed codes, a few fast flashes and 6 slow flashes for of compatible rolling codes or 6 slow flashes if they are non-compatible rolling codes but which could be managed as a fixed code. To memorize other codes, repeat the procedure from point 2 within 3 seconds, otherwise repeat from point 1.

ROLLING CODE - AUTOMATIC STORAGE VIA RADIO ON THE RECEIVER

Approach the receiver and press buttons 2 and 4 of the SAPIENS at the same time, the LED lights up red, immediately after press and release the button that needs to be memorized, the LED flashes green to indicate that the automatic activation procedure is starting and will last 25 seconds . Wait for the receiver to be activated (opening the gate, turning on the lights, etc.). The radio control is memorized.

ATTENTION: even the receivers of the models marked with the logo may have the radio disabled, in this case proceed by inserting the SAPIENS radio controls manually following the instructions of the original radio control.

NB The SAPIENS source code (hidden key) is transmitted as follows: press and release keys 3 and 4 simultaneously (steady red LED), within 3 sec. press the button for which you need the source code.