Shipping
shipping in 10 working days
Description
Terminal column 4 TX beams H 200 cm. 230V power supply
Mod. MANA IR SMA 20250 4T
SKU: MANA IR SMA 20250 4T
The MANA line of barriers with a range from 1 to 250 metres, designed for the external protection of large sites, can be composed and configured according to installation needs and the required level of safety, microwave only, active infrared only or combined in dual technology, where each section has an independent alarm output, manageable in AND or OR directly from the alarm control unit. Sturdy aluminum structure with protective polycarbonate screen, fixed on a base designed for installation on the floor, on a well or on request on the wall with its accessories. 230V power supply.
MANA IR SMA is the ideal barrier for long perimeters thanks to the range of action which goes from 1 to 250 m. Supports SMA (single man alignment) technology. It is ideal for any type of perimeter because it is equipped with internal receiving and transmitting optics that can be adjusted up to 180° which simplify installation and optimize performance. Configurations are possible directly on the board via dip-switches or via remote commands and it is equipped with an on-board power supply and high visibility signaling LED.
Outdoor range: 1-250 m
Indoor range: 1-500 m
Double beam optics: with 35 mm lenses in AND
Microwave frequency: \
Microwave lobe dimensions: \
Synchronization: wired - optical
Photodevices: Pulsed type rays with a wavelength of 950nm
Aiming system: SMA optical-acoustic technology
Spoke arrangement: Parallel or Crossed
Double beam configuration: 2-3-4 TX + 2-3-4 RX
Beam configuration in terminal column: 2-3-4 TX or 2-3-4 RX
Optics adjustment: 180° horizontal 20° vertical
MW sensitivity adjustment: \
IR detection system: OR-AND RANDOM on board or remote
Beam exclusion: 1st or 1st and 2nd beam on board or remote-controlled
Anti-crawl function: configurable ON Board
IR intervention time adjustment: 50-500ms with trimmer
Circuit power supply: 230 Vac with linear power supply + on-board toroid
Circuit absorption: 135mA - 150 mA based on the number of beams
Heater power supply: 24Vac internally powered
Heater absorption: 45W - 150W based on the number of beams and height
Battery housing: 12V 7Ah battery max
Operating temperature: -25°C / + 70°C
IR alarm output: Relay with free Nc contacts (on RX column)
MW alarm output: \
Anti-tamper output: Column opening tamper (on both columns)
fog disqualification output: dedicated OC: NA to GND
IR anti-masking output: Dedicated OC: NA to GND
RS-485 output (only with wired synchronism): Local and remote control with Adebus system
Environmental class: 4
Material: Black and IR transparent polycarbonate screen. Reinforced anodized aluminum extruded profile
Profile dimensions WxDxH: 250 mm x 200 mm from 1000 to 4000 mm on a 300 mm diameter round base, on request it is supplied with a specific base and accessories for fixing to a pole or wall
24 month warranty
