Pair Of Class 3 Photocells In Aluminum Range 15 M Cardin Cdr973ax New

Save €5,57

Model: eb-232111908115
Warranty: 24 months
Supplier: Cardin-Telcoma
Price:
€105,92 €111,49

Do you need help with this product? Contact us
Whatsapp-Share

Share this product
Email-Share Whatsapp-Share Facebook-Share Copy-Share

Shipping

shipping in 2-4 business days

Description

PAIR OF CLASS 3 PHOTOCELLS IN ALUMINUM RANGE 15 m

Maximum range 15 m
12/24 Vac-dc power supply
IP66 protection rating
Projector and receiver housed in watertight aluminum containers. Painting
high resistance. Optics mounted on self-frictional joints, adjustable both horizontally,
being able to perform a 90° rotation, which vertically with a possible rotation of
±30° compared to the standard position.
Possibility of connecting a maximum of 3 pairs of photocells synchronizing the transmission
(multiplexed system).
The kit contains:
- 1 projector in aluminum container;
- 1 receiver in aluminum container;
- 2 pipe presses;
- screws.

Coppia Di Fotocellule Classe 3 In Alluminio Portata 15 M

Mod. CDR973AX

POWER SUPPLY 12/24 Vac-dc
MAXIMUM RANGE 15 METERS
COMPLIES WITH SAFETY STANDARDS EN12978, CATEGORY 3
OF EN13849-1 AND TYPE 2 OF EN61496-2

IP66 anti-burglary aluminum container.

CDR 973 defines a range of latest infrared security systems
generation, specific for the «protection» of driveways and pedestrian passages equipped with
automatic opening and closing systems: it is a real safety system that
meets the requirements of the EN 12978 standard. The equipment uses a
renewed optical transmission system (meeting the specifications indicated by the type
2 of CEI IEC 61496-2) which respects an infrared emission angle +/- 5°.
The management of both the transmitting and receiving parts was carried out via
microcontroller, obtaining the advantage of greater precision in generation
of pulses transmitted via infrared which, modulated according to a digital protocol which
allows the transfer of information from the transmitter to the receiver, eliminating the risk
of blinding caused by other infrared systems working on the same frequency
and places nearby. A top class equipment that is available on three
different containers to satisfy all installation needs.
Technical description
Infrared transmission by digital modulation of the carrier signal.
Reception with demodulation and protocol decoding, for device recognition
transmitter.
Possibility of connecting up to 3 devices in cascade, multiplexing the transmission, without
have interference; the selection is made via a three-way dip-switch located on both
TX and RX by connecting the three transmitters to each other using a two-wire cable
(synchronism); no additional connections are required on the receivers.
Double relays on receiver, driven with digital control to increase safety
(rest/alarm state control).
Jumper to select the output contact mode (pure contact, NC or with resistance
8.2kO).
Possibility to select the release delay via dip-switch (0.2 sec or 3 sec).
High intensity LED (on the receiver) to facilitate the centering of the optics to a certain
distance.
2 signaling LEDs on the receiver:
- green - on indicates photocell at rest;
- red - steady on indicates photocell in alarm, flashing indicates faulty photocell.
Pre-amplified receiver optics.
Reinforced power supply to tolerate voltages up to 40 Vdc or 28 Vac.


24 month warranty