Electronic Board Zbx7n Ex Zbx74 For Sliding Motors Bx-a Bx-b 88001-0065

ZBX7N electronic board for BX-A/BX-B sliding motors

The ZBX7N control card is suitable for controlling sliding automations powered by 230V single-phase of the BX-A/BX-B series. The board must be powered with a voltage of 230V (ac) at terminals L1 and L2. It is protected at the input with two 5A fuses, while the low voltage control devices (24V) are protected with a 1A fuse. replaces the old came cards: ZBX6 and ZBX7 The total power of the accessories (24V) must not exceed 20W. Safety. - The photocells can be connected and set up for: - Reopening during the closing phase (2-C1), the photocells, detecting an obstacle during the closing phase of the gate, cause the direction to reverse until it is completely opened; - Partial stop, gate stops if moving with consequent predisposition for automatic closing (2-C3); - Total stop (1-2), stopping the gate with the exclusion of the automatic closing cycle, to resume gate movement, use the pushbutton panel or the radio control.