Din Module For Control Of 2 Groups Of Motors Or Ac Or Dc Actuators Nice Dmdcm

DIN module for controlling 2 groups of AC or DC motors or actuators through low voltage dry contact outputs

DMDCM mod

Each input can be normally
open or normally closed.

Each DMDCM module (Din Module
dry contact Motor) is equipped with:
• 4 dry contact inputs for connection
of pushbutton panels or connection to other systems
of command;
• 2 outputs, each for connection
of up to 8 motors via dry contact.

Performance
For correct operation the DMDCM module
must be connected to the two power modules
DMLPS and DMBPD.

Each Nice modular system can be composed
from up to 6 motor interface modules,
if the DMBM module is not present.
If the latter is present, they can be
connect up to 16 motor interface modules.

Programming
In the case of installations with multiple modules,
rapid addressing of outputs via jumper
or through the Nice Screen Configuration Tool
included in the DMBM module.
Thanks to the Test mode you can check
easily which motors are connected
to the module and check the correctness of the connections
electrical performed.

Each module is equipped with three LEDs
diagnostics for easier
programming.