Shipping
Description
Timed step-by-step electronic relay module, 500W, DIN rail wired system, without neutral
Mod. 5454060
SKU: 5454060
The MTR500M DIN rail module is a wired electronic timed step relay, which allows the management of lights or automations up to a maximum of 500W.
It provides double timing: a main one from 2 seconds to 4 hours and an extended one (1 hour), with switch-off warning. It is possible to centralize the management of multiple MTR500M via pilot wire, using the CVI50 accessory (code 5454805).
Thanks to the "soft start / soft stop" function, it limits the inrush current during the switch-on phase of the light load, thus increasing the life of the lamp and buttons.
The module has 2 types of integrated electronic protections: in case of short circuit on the load (with automatic recovery after the fault has been eliminated) and against overheating. It is also immune to mains disturbances up to 1.5 kV.
It also allows control via a low voltage button (12 or 48 V), both DC and AC, with the addition of the ADBT accessory.
Accessories:
ADBT (code 5454076): Low voltage adapter 12-48V AC or DC
D600V (code 5454072): Diode for centralization of modules via pilot wire
BV40 (code 5454071): Electronic coil. Allows the use of modules from the 500 range with buttons with indicator light
CVI50 (code 5454805): Allows the centralization of the 500 range modules
• Mains voltage: 230V ~ (+10% - 15%) - 50Hz
• Power: min. 5VA max. 500VA (300VA in watertight boxes)
• Maximum current: 1.3A / 2.2A waterproof boxes: 1.3A /300VA other boxes: 2.2A /500VA
• Ambient temperature: -20°C + 40°C
• Relative humidity: 0 to 90%
• Dimensions (W x H x D): 17.5 x 87 x 62 mm
24 month warranty
eb: 235622385682
