Shipping
Description
Electronic step-by-step relay module with timer, 500W, flush-mounted wired system, without neutral
Mod. 5454050
SKU: 5454050
The MTR500E flush-mounted module is a wired electronic timed step-by-step relay, which allows the management of lights or automations up to a maximum of 500W.
It provides double timing: a main one from 2 seconds to 4 hours and an extended one (1 hour), with switch-off warning. It is possible to centralize the management of multiple MTR500E via pilot wire, using the CVI50 accessory (code 5454805).
Thanks to the "soft start / soft stop" function, it limits the inrush current during the switch-on phase of the light load, thus increasing the life of the lamp and buttons.
The module has 2 types of integrated electronic protections: in case of short circuit on the load (with automatic recovery after the fault is eliminated) and against overheating. It is immune to network disturbances up to 1.5 kV and 100% waterproof, so it can also be installed outdoors.
It also allows control via a low voltage button (12 or 48 V), both DC and AC, with the addition of the ADBT accessory.
Accessories:
ADBT (code 5454076): Low voltage adapter 12-48V AC or DC
D600V (code 5454072): Diode for centralization of modules via pilot wire
BV40 (code 5454071): Electronic coil. Allows the use of modules from the 500 range with buttons with indicator light
CVI50 (code 5454805): Allows the centralization of the 500 range modules
• Mains voltage: 230V ~ (+10% - 15%) - 50Hz
• Power: min. 5VA max. 500VA (300VA in watertight boxes)
• Maximum current: 1.3A / 2.2A; waterproof boxes: 1.3A /300VA other boxes: 2.2A/500VA
• Ambient temperature: -20°C + 40°C
• Relative humidity: 0 to 99%
• Dimensions (L x H x D): 37 x 35 x 12 mm
24 month warranty
eb: 375502802290
