Shipping
Description
Electronic relay module step by step with timer, 2000W, DIN rail wired system, with neutral
Mod. 5454360
SKU: 5454360
The MTR2000M DIN rail module is a wired electronic timed step relay that allows the management of lights or automations up to a maximum of 2000W.
Thanks to its potential-free contact, it can control any device up to 2000W (e.g. light, extractor fan, irrigation...) that requires a clean contact.
It provides double timing: a main one from 2 seconds to 4 hours and an extended one (1 hour), with switch-off warning. It integrates the daily scheduling function of two actuations (switch-on
and shutdown) automatically at scheduled times. It is possible to centralise multiple MTR2000E modules via pilot wire and the R12M accessory (code 5454073), to allow total switching on or off.
Thanks to the "soft start / soft stop" function, it limits the inrush current during the switch-on phase of the light load, thus increasing the life of the lamp and buttons.
The module features 2 types of integrated electronic protections: in case of short circuit on the load (with automatic reset after fault elimination) and against overheating.
It also allows control via a low voltage button (12 or 48 V), both DC and AC, with the addition of the ADBT accessory.
Immunity to mains disturbances up to 1.5 kV.
Increases the life of bulbs and buttons.
Accessories:
ADBT (code 5454076): Low voltage adapter 12-48V AC or DC.
R12M (code 5454073): Interface for double button (not interlocked).
D600V (code 5454072): Diode for centralization of modules via pilot wire
• Mains voltage: 230V ~ (+10% - 15%) - 50Hz
• Power: on resistive load 10 A, 2000W
• Maximum current: 1.3A / 2.2A waterproof boxes: 1.3A /300VA other boxes: 2.2A/500VA
• Ambient temperature: -20°C + 40°C
• Noise level: < 60 dB at 20 cm
• Dimensions (LxHxD): 17.5 x 87 x 62 mm
24 month warranty
eb: 375502805189
