Shipping
shipping in 2-4 business days
Description
Remote control
CARDIN
TXQ 449,200
ROLLING CODE
2-channel
CARDIN brand
Model S449-QZ2
Frequency 433.92 MHz
Number of keys 2
Coding type Registration with the receiver
Battery type CR2032
Dimensions 72 x 12 x 34 mm
Battery and instruction sheet included Yes
This remote control replaces:
S449-QZ2, CARDIN S449-QZ2 GREEN OLD
The duplication procedure must be carried out nearbyof the receiving control unit.
1. Using a pin, press the button located in the hole under the
buttons of the working radio control: to the short sound emitted
from the control unit release the button.
2. Instantly press the remote control button
working: the control unit will emit another short sound.
3. Press the button on the new remote control (to be coded)
that you want to encode: the control unit will emit 2 soundsconsecutive.
4. After releasing the button the control unit will emit a
longer sound than the previous ones. At least wait
10 seconds and try to open the gate with
the newly programmed radio control. To duplicate others
radio controls repeat the operation starting from point 1.
If the procedure is not successful or if so
should make errors during programming
wait 20 seconds and start the operation again
programming from point 1.
NOTE:
If you hold down the hidden button for too long the remote control
I go into battery saving mode working once every
3 times when you press the button. To exit this mode hold
Press and hold the hidden button until the Cardin LED flashesquickly
