Set Vertigo 8 Wi-fi Rib Ad08042

SET VERTIGO 8 Wi-Fi

SET VERTIGO 8 Wi-Fi
includes VERTIGO 8 devices
Wi-Fi, MASTER Wi-Fi FR, Antenna
868MHz, 4 1.5V AA batteries
12÷24V ac/dc

Mod. AD08042

• MASTER Wi-Fi is the heart of the system. A latest generation dual frequency receiver that manages itself and
all the automation accessories completely via radio: Photocells, Edges, Flashing light, remote controls and Selectors
key.
• Manages SUN, SUN CLONE remote controls, BLOCK Wi-Fi key selectors, digital keyboard, NOVA Wi-Fi photocells and
VERTIGO Wi-Fi, TOUCH Wi-Fi edges, SPARK Wi-Fi flashers completely via radio.
• EN13849-2:2008 Certified Safety Device and together with a RIB electronic panel equipped with self-test is a
Class 2 protective device.
• Firmware certified according to EN61508-3:2001.
• Can be interfaced with RIB control units, old and new.
• Available in plug-in version or with screw terminal block to be applied in combination with other panels
brands.
• It fits directly into the RIB control units in the same connector normally used for standard radio receivers.
• The controls work at 433MHz, while the safeties work at 868MHz.
• The system allows you to completely eliminate the electrical cables between the engine management control unit and all the accessories
command, protection and signaling.
• Manages up to 100 different control devices and 1 signaling device (flashing light).
• Manages up to 6 Wi-Fi security devices by uniquely identifying them (as already seen in the RED system). For example
4 pairs of NOVA Wi-Fi photocells and 2 TOUCH Wi-Fi edges
• The range of the remote controls is greater than 100m, while for the safety devices it is greater than 20m.
• Power supply 12÷/24V ac/dc (10÷30V ac/dc via automatic regulator).
• When it is in the version with terminal block, it is supplied with a plastic and double-sided adhesive container for practical fixing inside the
containers from other brands (such as the radio receivers with terminal block currently in production).
• The board facilitates the installation of the devices using some LEDs and a buzzer.
• MASTER Wi-Fi is equipped with cables to connect to the safety and command inputs of the control panel.
• The 433MHz antenna must be connected, while the 868MHz one is incorporated into the MASTER Wi-Fi card.
• Each Wi-Fi security device will have a unique recognition code programmed at the factory.
• Possibility of excluding a safety device in case of maintenance by moving a microswitch on the MASTER Wi-Fi board.
The gate will be able to continue working.
• Possibility to delete the single security and insert a new one.

24 month warranty