Shipping
shipping in 2-4 business days
Description
Remote control
TELCOMA
NOIRE4E
4-channel
Professional
Now marketed with the CARDIN TRADE brand
1. Press and hold down button 2 (top right) of the new remote control (from
encode) and at the same time press button 1 (top left) 4 timessame.
2. Release only button 1 (top left): the LED of the new remote control (fromencode) will flash slowly.
3. Press and hold the button you want to duplicate on the existing remote control
working in the receiver: the LED of the new remote control (to be coded) will light upsteady light.
4. Release button 2 (top right): the LED of the new remote control (to be coded) will startto flash quickly.
5. In the new remote control (to be coded), press the button to which we want to assign
the new code and release the button only when the new radio control LED (fromencode) lights up steadily.
6. Approach the receiver and press the button of the newly coded remote control untilautomation is activated.
If the procedure described above does not work, follow the instructions below:
In order to enable the new remote control, it is necessary to intervene on the receiving control unitbe able to access the programming buttons.
1. Press and release the P1 button (on the receiver): LED L1 will emit a series of 5 flashes.
2. While the receiver LED is flashing, press the button on the new remote control (fromcode) that you want to program
3. The LED Ll (on the receiver) will light up for approximately three seconds as confirmation of correctmemorizing the code.
4. LED Ll will start flashing again waiting for a new remote control, if within 5
flashes does not receive any the receiver will automatically exit the procedureprogramming.
5. Follow the same procedure for the other button (P2 on the receiver)
NOTES: 1. The simultaneous flashing of all the receiver LEDs during programming indicatesthat the radio control is already enabled
2. The alternating flashing of all the receiver LEDs during programming indicates that thememory is full.
24 month warranty
