Shipping
Shipping in 5-10 business days
Description
TERMINAL column 4-beam RX H 200 cm. 230V power supply
Mod. MANA IR SMA 20100 4R
SKU: MANA IR SMA 20100 4R
The MANA barrier range, with a range of 1 to 250 metres, is designed for the outdoor protection of large sites and can be assembled and configured to suit installation requirements and the required security level: microwave only, active infrared only, or combined dual technology, with each section featuring an independent alarm output that can be managed in AND or OR mode directly by the alarm control panel. Robust aluminium structure with a protective polycarbonate screen, mounted on a base designed for floor or pit installation, or, on request, on a wall using the relevant accessories. 230V power supply.
MANA IR SMA is the ideal barrier for long perimeters thanks to its operating range of 1 to 250 m. It supports SMA (single man alignment) technology. It is ideal for any type of perimeter thanks to its internal receiving and transmitting optics, which can be adjusted up to 180° to simplify installation and optimise performance. Configurations can be set directly on the board using DIP switches or via remote commands. It is equipped with an on-board power supply and high-visibility indicator LEDs.
Outdoor range: 1-250 m
Indoor range: 1-500 m
Dual-beam optics: with 35 mm lenses in AND mode
Microwave frequency: \
Microwave lobe dimensions: \
Synchronisation: wired - optical
Photoelectric devices: Pulsed beams with a wavelength of 950nm
Aiming system: SMA optical-acoustic technology
Beam arrangement: Parallel or crossed
Dual-beam configuration: 2-3-4 TX + 2-3-4 RX
Beam configuration in terminal column: 2-3-4 TX or 2-3-4 RX
Optics adjustment: 180° horizontal, 20° vertical
MW sensitivity adjustment: \
IR detection system: OR- AND RANDOM on board or remotely configurable
Beam exclusion: 1st or 1st and 2nd beam on board or remotely configurable
Crawl-through protection function: configurable ON Board
IR response time adjustment: 50-500ms with trimmer
Circuit power supply: 230 Vac with on-board linear power supply + toroidal transformer
Circuit current draw: 135mA - 150 mA depending on the number of beams
Heater power supply: 24Vac, internally powered
Heater power consumption: 45W - 150W depending on the number of beams and height
Battery compartment: 12V 7Ah max battery
Operating temperature: -25°C / + 70°C
IR alarm output: Relay with volt-free Nc contacts (on RX column)
MW alarm output: \
Tamper output: Column opening tamper (on both columns)
Fog disqualification output: Dedicated OC: NO to GND
IR anti-masking output: Dedicated OC: NO to GND
RS-485 output (wired synchronisation only): Local and remote control with Adebus system
Environmental class: 4
Material: Black polycarbonate screen, transparent to IR. Reinforced anodised extruded aluminium profile
Profile dimensions WxDxH: 250 mm x 200 mm from 1000 to 4000 mm on a round base with a diameter of 300 mm; on request, supplied with a dedicated base and accessories for pole or wall mounting
24-month warranty
