Original Genius Amigo Tx4 Ja334 868 Mhz gate opener remote control

GENIUS

KILO TX4 868MHZ

ROLLING CODE

4-channel

ORIGINAL

Procedure for duplication:

1. Press the first 2 keys of the simultaneously
MASTER radio control already working in receiver**
and hold them down until their LED flashes. Release both buttons.

2. While the LED is flashing, move the vehicle towards the front
MASTER remote control already working in receiver of the NEW remote control (to be coded).

3. On the MASTER radio control (already working in the receiver),
while the LED is still flashing, press and hold
pressed the first key you want to duplicate. Its LED will light up steadily.

4. Press the button on the new remote control (to be coded).
equivalent to be copied and released only when its LED has not flashed twice.

5. Release the MASTER radio control button (already working in the receiver).

6. Repeat the procedure for all the keys you want to duplicate.

If the procedure is not successful or if errors are made during the
programming, wait 20 seconds and start again from point 1.
*To recognize a Master remote control, press any button on the remote control already
working in the receiver and check what type of flashing its LED emits:
- if it flashes briefly before turning on with a fixed light, it is a MASTER and can
be duplicated by following the procedure described on this page.
- if it turns on immediately with a steady light it is a SLAVE remote control and cannot
be duplicated. In this case you will have to contact exclusively the installer who has you
the automation is mounted.
**Be careful not to confuse the two remote controls: the MASTER remote control is already functioning
receiver with the new one to be coded