Shipping
Shipping in 2-4 business days
Description
Complete kit for automating counterweight up-and-over doors with CURVED arms
Model BAZER 2M
THE IRON ARMS OF THE BAZER UP-AND-OVER KIT MUST BE WELDED
+ No. 1 LED FLASHING LIGHT
+ No. 1 PAIR OF PHOTOCELLS
+ No. 2 EXTERNAL RELEASE MECHANISMS
for Intensive Use
Professional
The Bazer gear motor is suitable for operating counterweight up-and-over doors with a maximum area of approximately 9 m².
It is equipped with a mechanical release system that allows the door to be operated manually in the event of a power failure.
Supplied as standard with opening and closing limit switches.
Can be equipped with a courtesy light and electronic control unit with slowdown.
For large up-and-over doors, the use of two gear motors is recommended.
Features:
Irreversible electromechanical gear motor.
Opening and closing limit microswitches.
Built-in release lever.
Electronic slowdown during closing/opening.
Electronic torque adjustment.
Power supply: 230 Vac - 50 Hz.
CLICK THE LINKS FOR THE MANUALS:
MANUFACTURER'S INSTRUCTION MANUAL (1 OF 2)
MANUFACTURER'S INSTRUCTION MANUAL (2 OF 2)
KIT CONTENTS:
No. 2 230 V electromechanical gear motors with built-in limit switches.
No. 1 control unit located in the motor housing, with motor force adjustment trimmer and obstacle detection, opening and closing slowdown, 4 operating modes: step-by-step, semiautomatic 1 and 2, automatic shared-use mode.
Courtesy light, overvoltage protection, input for photocells and safety edges.
No. 1 single-channel radio receiver built into the control unit (433.9 MHz)
No. 1 antenna built into the control unit, range 20 meters (433.9 MHz)
No. 1 4-channel remote control
No. 1 kit of 2 curved arms
No. 2 galvanized support rails, 1.50 m
No. 2 internal emergency release mechanisms
No. 1 set of screws and brackets for installation
No. 1 mechanical and electronic installation instructions in ITALIAN
24-month warranty
eb: 235937115184
