Shipping
shipping in 2-4 business days
Description
Low voltage electromechanical actuator for swing gates
Mod. R251 FE
SKU: 41070/002
24V electromechanical actuator including connections and mechanical limit switches.
Residential use.
MAINS POWER SUPPLY: 230 Vac - 50 Hz
MOTOR POWER SUPPLY: 24 Vdc
MAX. DOOR WIDTH: 1.8 m WITHOUT ELECTRIC LOCK
MAX. LEAF WIDTH: 3 m WITH ELECTRIC LOCK
MAX. LEAF WEIGHT: 300 kg (for 3 m leaf), 500 kg (for 1.8 m leaf)
MAX. NUMBER OF CYCLES: 50 cycles/day
PROTECTION DEGREE: IP44
ABSORBED POWER: 48 W
ABSORBED CURRENT: 2 A
MAX. THRUST FORCE: 2500 N
ROD STROKE: 400 mm
LINEAR SPEED: 16 mm/s
OPERATING TEMPERATURE: -20° +50° C
ANTI-CRUSH SAFETY: Electronic
24V electromechanical arm with electronic limit switch adjustment (by means of internal microswitches). Suitable for systems in which it is not possible to use a stop on the ground. The adjustment of the electronic limit switches is only possible with the use of the BA24 equipment and the optional limit switch card.
Completely self-learning programming with the possibility of changing the parameters by simply adjusting the Dip Switches and trimmers on the board. Adjustable and pre-drilled rear bracket. The arms are equipped with mechanical limit switches that allow you to adjust the desired stroke. For leaves longer than 1.8 metres, the use of an electric lock is recommended.
Continuity of service guaranteed, in the event of a blackout, by two optional emergency batteries.
24 month warranty
