Cross20vei Actuator For Sliding Gates Up To 2000 Kg Ditec Ex Cross19v

Gearmotor powered by 230 Vac for gates up to 2000 Kg, for very intense use, 230 Vac three-phase motor, LCU43A integrated inverter control panel and ZENRS radio receiving module (433 MHz) included.
Version with magnetic limit switches.

Mod. CROSS20VEI (EX CROSS19V)

Sliding gates require flexible automations, capable of managing various frame sizes, different passage intensities and changing environmental situations, always guaranteeing maximum conditions of operational safety, functionality and reliability. The Ditec Cross range satisfies various private, commercial and industrial needs.
230 Vac inverter panel: the use of the inverter guarantees the motor greater power and torque in all phases of the stroke and preserves the mechanics of the gate by managing acceleration and deceleration ramps. Fast: 30 cm/s for gates up to 2000 kg , respecting current regulations

TECHNICAL FEATURES
Electromechanical actuator: for sliding gates up to 2000 kg
Stroke management: magnetic limit switch
Capacity: 2000 kg
Service class: very intense up to 450,000 cycles
Intermittent: S2 = 90 min, S3 = 90%
Cycles / hour: 27
Consecutive cycles: 44
Power supply: 230 Vac - 50/60 Hz
Absorption: 3.5 A
Thrust: 2000 N
Opening speed: 0.1 - 0.3 m/s
Closing speed: 0.1 - 0.3 m/s
Maximum travel: 60 m
Release for manual opening: key
Operating temperature: -20C° ÷ +55C° (-35C° ÷ +55C° with NIO activated)
Degree of protection: IP X4
Product dimensions (mm): 440x205x375 mm
Control panel: ref. LCU43A for CROSS20 with ZENRS receiver module included
Radio frequency: 433.92 MHz with ZENRS or BIXR2, 868.35 MHz with ZENPRS or with BIXPR2
Mains power supply: 230 Vac - 50/60 Hz
Motor power: 3.5A
24 Vdc and 24 Vac accessory power supply: 0.5 A max
Stroke management: virtual encoder and limit switch
Energy saving (GREEN mode): reduced consumption in standby*
Protection level of the panel: IP55

24 month warranty