Control Unit for 230V Swing Gates
433.92 MHz Receiver

Model EKOS-M2 230V

UNIVERSAL
for electromechanical and hydraulic motors
Professional

1. GENERAL INFORMATION

The universal self-learning control unit is designed to automate an access point with 1 or 2 230VAC motors. It features an innovative self-learning procedure for quick installation and four trimmers for fine-tuning the main parameters: force, pause time, obstacle detection sensitivity, and closing delay between the two motors.

Available programming modes:

- A quick self-learning program, in which the control unit automatically performs the learning cycle to acquire operating times and sets the start of deceleration, both when opening and closing, at 90% of the cycle.

- A professional program, in which the installer can determine when the gate leaves begin to decelerate, enable pedestrian opening via radio, and select how safety devices operate.

CLICK THE LINK FOR THE INSTRUCTION MANUAL:

MANUFACTURER'S INSTRUCTION MANUAL

2. MAIN FEATURES

• Controls and operates automated access systems with 1 or 2 230VAC motors (max. 1/2 Hp)

• Simplified and professional self-learning procedures for acquiring operating and deceleration times, and detecting the presence of safety devices.

• Motor force adjustable from 50-100% using a trimmer.

• Customizable partial (pedestrian) opening

• Pause time adjustable from 0 to 60 seconds using a trimmer.

• Obstacle detection response time adjustable from 0.1 to 3.0 seconds using a trimmer.

• Closing delay between motors adjustable from 3 to 30 seconds using a trimmer

• 12V 15W electric lock control

• Courtesy light control

• Built-in 433MHz receiver

• Stores 254 radio codes

• Reprogrammable Flash microprocessor

• Complies with the relevant European Directive: R&TTE 99/05/CE

• Supports remote controls with either simple fixed codes or rolling codes. Compatibility with other brands must be verified

WARNING: Remote Control Compatibility Guide

The receiver built into the control unit is not universal; it communicates specifically with certain 433.92 MHz coding systems. The exact list of compatible models is provided below:

1. Compatible ROLLING CODE Remote Controls

The control unit supports the high-security rolling code system used by the following brands and models:

Dieffematic: Equo Plus, Equo X, E010, Equo Slim, Tx-e models

BFT: Mitto and Cool models

2. FIXED-CODE Remote Controls and Universal Remote Control Support

If you use fixed-code remote controls, compatibility is guaranteed with:

Aster 21/a and Aster 31/1 models

Note on universal remote controls: Aster 21/a and Aster 31/1 models can be used as "master" controls to pair commercial universal remote controls. Simply clone the code directly from one remote control to another to make them immediately operational with the control unit.

3. TECHNICAL SPECIFICATIONS

Control unit power supply: 230VAC

Motor output: 2 x 1/2Hp

Motor current: Max. 8 Amps

Accessory power supply: 24 VDC - 750 mA

Operating temperature: -20°C / + 55 °C

Programming parameters: stored in EE-PROM

Function manager: microprocessor with watchdog

24-month warranty
eb: 254285665095