Control Unit for Swing Gates 230v
433,92 Mhz Receiver 

Mod. EKOS-M2 230v

UNIVERSAL
for electromechanical and hydraulic motors
Professional

1. GENERAL INFORMATION

The universal self-learning control unit is designed to automate an access point with 1 or 2 230VAC motors. It features an innovative self-learning procedure for quick installation and four trimmers for fine adjustment of the main parameters: force, pause time, obstacle detection sensitivity, and closing delay between the two motors.

Available options:

- A quick self-learning programming mode, in which the control unit automatically learns the operating times and sets the start of deceleration at 90% of the opening and closing cycle.

- A professional programming mode, in which the installer can set when the gate leaves start to decelerate, enable pedestrian opening via radio, and select how the safety devices operate.

CLICK THE LINK FOR THE INSTRUCTION MANUAL:

MANUFACTURER'S INSTRUCTION MANUAL

2. MAIN FEATURES

• Controls and operates automated access systems with 1 or 2 230VAC motors (max. 1/2 Hp)

• Simplified and professional self-learning procedures for learning operating and deceleration times and detecting the presence of safety devices.

• Motor force adjustable from 50-100% using a trimmer.

• Customizable partial (pedestrian) opening

• Pause time adjustable from 0 to 60 seconds using a trimmer.

• Obstacle detection response time adjustable between 0.1 and 3.0 seconds using a trimmer.

• Motor closing delay adjustable between 3 and 30 seconds using a trimmer

• Controls 12V 15W electric lock

• Courtesy light control

• Built-in 433MHz receiver

• Stores 254 radio codes

• Reprogrammable Flash microprocessor

• Complies with the relevant European Directives: R&TTE 99/05/CE

• Supports fixed-code or rolling-code remote controls. Compatibility with other brands must be verified

WARNING: Remote Control Compatibility Guide

The receiver built into the control unit is not universal; it communicates specifically with certain 433,92 MHz coding systems. Below is the exact list of compatible models:

1. Compatible ROLLING CODE Remote Controls

The control unit supports the high-security rolling-code system used by the following brands and models:

Dieffematic: Equo Plus, Equo X, E010, Equo Slim, Tx-e models

BFT: Mitto and Cool models

2. FIXED-CODE Remote Controls and Universal Remote Control Support

If you use fixed-code remote controls, compatibility is guaranteed with:

Aster 21/a and Aster 31/1 models

Note for universal remote controls: The Aster 21/a and Aster 31/1 models can be used as "master" remote controls to pair commercial universal remote controls. Simply clone the code directly from one remote control to another to make them immediately operational with the control unit.

3. TECHNICAL SPECIFICATIONS

Control unit power supply: 230VAC

Motor output: 2 x 1/2Hp

Motor current: Max. 8 Amperes

Accessory power supply: 24 VDC - 750 mA

Operating temperature: -20°C / + 55 °C

Programming parameters: stored in EE-PROM

Function controller: microprocessor with watchdog

24-month warranty
eb: 264387272935