Shipping
shipping in 2-4 business days
Description
Complete Kit for Automation of Overhead Doors
to Counterweights
THE IRON ARMS OF THE BAZER TILTING KIT ARE TO BE WELDED
for Intensive Use
Professional
Model BAZER 1M
The Bazer gearmotor is suitable for operating counterweight overhead doors with a maximum surface area of approximately 9 m2.
It is equipped with a mechanical release system that allows the use of the door in the absence of electricity.
It is supplied as standard with opening and closing limit switches.
It can be equipped with courtesy light and electronic equipment with slowdown.
For large overhead doors we recommend the use of two gearmotors.
WE RECOMMEND INSTALLING THIS AUTOMATION WHEN
THE SPACE BETWEEN THE DOOR AND THE CEILING IS LESS THAN 10CM
IF THE DOOR EXCEEDS 3 METERS IN WIDTH, THE 2 MOTOR KIT MUST BE INSTALLED.
Characteristics:
Irreversible electromechanical gearmotor.
Opening and closing limit switch microswitches.
Built-in release lever.
Electronic slowdown during closing/opening.
Electronic torque regulation.
Power supply 230 Vac - 50 Hz.
CLICK ON THE LINKS FOR THE MANUALS:
KIT COMPOSITION:
n° 1 230v electromechanical gearmotor with built-in limit switch.
n° 1 control unit positioned in the engine crankcase, with trimmer for regulating the engine force and obstacle detector,
slowdown in opening and closing, 4 operating logics: step-by-step, semi-automatic 1 and 2, condominium automatic.
Courtesy light, Overvoltage protection, Photocell input, safety edges.
n° 1 Single-channel radio receiver incorporated in the control unit (433.9 MHz)
n° 1 Antenna incorporated into the control unit, range 20 meters (433.9MHz)
n° 1 4-channel remote control
n° 1 Kit 2 straight arms
n° 2 transmission shafts
n° 1 Galvanized spar 1.50m
n° 1 Internal emergency release
n° 1 Set of screws and brackets for mounting
n° 1 Assembly instructions for the mechanical and electronic parts in ITALIAN
24 month warranty
