Shipping
Shipping in 5-10 business days
Description
VIGILO 2281 fully retractable oil-hydraulic bollard
• Designed and manufactured
for regulating and restricting vehicle access to private roads, driveways, parking areas and
urban areas in general. Column diameter: 200 mm.
Available with columns in various heights; also available with LEDs.
Rubber column edge protector.
• Oil-hydraulic
quick and easy access to the hydraulic control unit and oil-hydraulic piston.
Manual release with key to lower the column. Tested for intensive use.
intensive use at both low and high temperatures. Simplified maintenance.
• Quick and easy installation
thanks to its low weight and ground sleeve, it does not require any special
excavation or masonry work. Each electrical cable is 10 m long (standard).
• Versatile
wide range of control accessories (transmitters, tags, keypads,
etc.) and safety accessories (magnetic loop detector, traffic lights, etc.) to ensure
efficient and accurate system control.
The ELPRO S40 electronic controller manages up to four bollards
simultaneously.
Mod. VIGILO 2281
Column diameter: Ø 200 mm
Column thickness: 4 mm
Column height: 800 mm
Column material: Fe 360 steel
Column finish: RAL 7016 polyester powder coating
Column material, stainless steel version: AISI 304
Ground sleeve: hot-dip galvanized
Raising time: ~ 7.7 s
Lowering time: ~ 7.0 s
Operating temperature: -20 °C +80 °C (*)
Oil type: Oil FADINI code 708L
Supply voltage: 230 Vac- 50 Hz
Power consumption: 330 W
Current draw: 1.8 A
Output power: 0.25 kW (0.33 CV)
Hydraulic control unit protection rating: IP 67
Operating frequency: intensive
Impact resistance: 30,000 J
Impact resistance: 160,000 J
Weight: 131 kg
Column diameter (mm): 200
Height (mm): 800
Limit switches: column lowered/raised
Column finish: satin-finished AISI 304 stainless steel
LED indicator: Yes
Solenoid valve (24 Vdc): No
NOTE: Retractable bollard operated by an oil-hydraulic piston, with built-in hydraulic control unit. 230 V power supply, 10 m of electrical cables.
Fe steel column treated by cataphoresis and coated with polyester paint (the column is made of AISI 304 stainless steel where specified by the item code). Sticker
approved retroreflective.
Special key supplied for manually lowering the column.
All models are supplied with a hot-dip galvanized steel ground sleeve. The piston-hydraulic control unit housing assembly is
treated with electrogalvanizing.
For each bollard with solenoid valve, the 24 V voltage stabilizer, code 9321L, must be provided.
24-month warranty
