Control Unit for 230 V Swing Gates
433.92 MHz Receiver

Model EKOS-M2 230v

UNIVERSAL
for electromechanical and hydraulic motors
Professional

1. GENERAL INFORMATION

This universal self-learning control unit is designed to automate an access point with 1 or 2 230 VAC motors. It features an innovative self-learning procedure for quick installation and four trimmers for fine adjustment of the main parameters: force, pause time, obstacle detection sensitivity, and closing delay between the two motors.

Available options:

- quick self-learning programming, in which the control unit automatically performs the learning cycle to record operating times and sets the start of deceleration to 90% of the operating cycle, both during opening and closing.

- professional programming, in which the installer can determine when the gate leaves start to decelerate, enable pedestrian opening via radio control, and select how the safety devices operate.

CLICK THE LINK FOR THE INSTRUCTION MANUAL:

MANUFACTURER'S INSTRUCTION MANUAL

2. MAIN FEATURES

• Control and management of automated access points with 1 or 2 230 VAC motors (max. 1/2 Hp)

• Simplified and professional self-learning procedures for recording operating and deceleration times, and detecting the presence of safety devices.

• Motor force adjustable from 50-100% using a trimmer.

• Customizable partial (pedestrian) opening

• Pause time adjustable from 0 to 60 seconds using a trimmer.

• Obstacle detection response time adjustable from 0.1 to 3.0 seconds using a trimmer.

• Motor closing delay adjustable from 3 to 30 seconds using a trimmer

• 12 V 15 W electric lock management

• Courtesy light management

• Built-in 433 MHz receiver

• 254 radio codes can be stored

• Reprogrammable Flash microprocessor

• Complies with the applicable European directives: R&TTE 99/05/CE

• Supports radio controls with either simple fixed code or rolling code. Compatibility with other brands must be verified

WARNING: Radio Control Compatibility Guide

The receiver built into the control unit is not universal; it communicates specifically with certain 433.92 MHz coding systems. Below is the exact list of compatible models:

1. Compatible ROLLING CODE Radio Controls

The control unit supports the high-security rolling code of the following brands and models:

Dieffematic: Equo Plus, Equo X, E010, Equo Slim, Tx-e models

BFT: Mitto and Cool models

2. FIXED CODE Radio Controls and Universal Compatibility

If you use fixed-code remote controls, compatibility is guaranteed for:

Aster 21/a and Aster 31/1 models

Note on universal remote controls: Aster 21/a and Aster 31/1 models can be used as "master" controls to pair commercial universal remote controls. Simply clone the code directly from one remote control to another to make them immediately operational with the control unit.

3. TECHNICAL SPECIFICATIONS

Control unit power supply: 230 VAC

Motor output: 2 x 1/2Hp

Motor current: Max 8 Ampere

Accessory power supply: 24 VDC - 750 mA

Operating temperature: -20°C / + 55 °C

Programming parameters: stored in EE-PROM

Function management: microprocessor with watchdog

24-month warranty
eb: 224614280439