Control Unit for 230V Swing Gates
433.92 MHz Receiver 

Mod. EKOS-M2 230v

UNIVERSAL
for electromechanical and hydraulic motors
Professional

1. GENERAL INFORMATION

The universal self-learning control unit is designed to automate an entrance with 1 or 2 230VAC motors. It features an innovative self-learning procedure for quick installation and four trimmers for fine adjustment of the main parameters: force, pause time, obstacle detection sensitivity, and closing delay between the two motors.

Available features:

- Quick self-learning programming, in which the control unit automatically runs a learning cycle to acquire the operating times and sets the start of deceleration to 90% of the cycle in both opening and closing.

- Professional programming, which allows the installer to set when the gate leaves start to decelerate, enable pedestrian opening via radio control, and select how the safety devices operate.

CLICK THE LINK FOR THE INSTRUCTION MANUAL:

MANUFACTURER'S INSTRUCTION MANUAL

2. MAIN FEATURES

• Control and operation of automated access systems with 1 or 2 230VAC motors (max. 1/2 Hp)

• Simplified and professional self-learning procedures to acquire operating and deceleration times and detect the presence of safety devices.

• Motor force adjustable from 50-100% via trimmer.

• Customizable partial (pedestrian) opening

• Dwell time adjustable from 0 to 60 seconds via trimmer.

• Obstacle detection response time adjustable from 0.1 to 3.0 seconds via trimmer.

• Motor closing delay adjustable from 3 to 30 seconds via trimmer

• 12V 15W electric lock control

• Courtesy light control

• Built-in 433MHz receiver

• Stores up to 254 radio codes

• Reprogrammable Flash microprocessor

• Complies with the relevant European Directive: R&TTE 99/05/EC

• Supports radio controls with either simple fixed codes or rolling codes. Compatibility with other brands must be checked

WARNING: Radio Control Compatibility Guide

The receiver built into the control unit is not universal and communicates specifically with certain 433.92 MHz encodings. Below is the exact list of compatible models:

1. Compatible ROLLING CODE Radio Controls

The control unit supports the high-security rolling code encoding of the following brands and models:

Dieffematic: Equo Plus, Equo X, E010, Equo Slim, Tx-e models

BFT: Mitto and Cool models

2. FIXED-CODE Radio Controls and Universal Control

If you use fixed-code remote controls, compatibility is guaranteed with:

Aster 21/a and Aster 31/1 models

Note for universal remote controls: Aster 21/a and Aster 31/1 models can be used as "master" remotes to pair commercial universal remote controls. Simply clone the code directly from one remote control to another to make them ready to use with the control unit.

3. TECHNICAL SPECIFICATIONS

Control unit power supply: 230VAC

Motor output: 2 x 1/2Hp

Motor current: Max. 8 Amperes

Accessory power supply: 24 VDC - 750 mA

Operating temperature: -20°C / + 55 °C

Programming parameters: stored in EE-PROM

Function controller: microprocessor with watchdog

24-month warranty
eb: 372684989381