230V Control Unit for Swing Gates
433.92 MHz Receiver

Mod. EKOS-M2 230V

UNIVERSAL
for electromechanical and hydraulic motors
Professional

1. GENERAL INFORMATION

This universal self-learning control unit is designed to automate an access point with 1 or 2 230VAC motors. It features an innovative self-learning procedure for quick installation and four trimmers for fine-tuning the main parameters: force, pause time, obstacle detection sensitivity, and closing delay between the two motors.

Available options:

- fast self-learning programming, during which the control unit automatically performs the learning cycle to acquire operating times and sets the start of the slowdown phase at 90% of the operating cycle, both when opening and closing.

- professional programming, which allows the installer to set when the leaves start to slow down, enable pedestrian opening via radio, and configure how the safety devices operate.

CLICK THE LINK FOR THE INSTRUCTION MANUAL:

MANUFACTURER'S INSTRUCTION MANUAL

2. MAIN FEATURES

• Controls and operates automated access systems with 1 or 2 230VAC motors (max. 1/2 Hp)

• Simplified and professional self-learning procedures for acquiring operating and slowdown times and detecting the presence of safety devices.

• Motor force adjustable from 50-100% via trimmer.

• Customizable partial (pedestrian) opening

• Pause time adjustable from 0 to 60 seconds via trimmer.

• Obstacle detection response time adjustable from 0.1 to 3.0 seconds via trimmer.

• Motor closing delay adjustable from 3 to 30 seconds via trimmer

• 12V 15W electric lock control

• Courtesy light control

• Built-in 433MHz receiver

• Stores 254 radio codes

• Reprogrammable Flash microprocessor

• Complies with the relevant European Directive: R&TTE 99/05/CE

• Supports radio controls with either simple fixed code or rolling code. Compatibility with other brands must be checked

WARNING: Radio Control Compatibility Guide

The receiver integrated into the control unit is not universal; it communicates specifically with certain 433.92 MHz coding systems. Below is the exact list of compatible models:

1. Compatible ROLLING CODE Radio Controls

The control unit supports the high-security rolling code used by the following brands and models:

Dieffematic: Equo Plus, Equo X, E010, Equo Slim, Tx-e models

BFT: Mitto and Cool models

2. FIXED CODE Radio Controls and Universal Control

If you use fixed-code remote controls, compatibility is guaranteed with:

Aster 21/a and Aster 31/1 models

Note for universal remote controls: Aster 21/a and Aster 31/1 models can be used as "masters" to pair commercial universal remote controls. Simply clone the code directly from one remote control to another to make them immediately operational with the control unit.

3. TECHNICAL SPECIFICATIONS

Control unit power supply: 230VAC

Motor output: 2 x 1/2Hp

Motor current: Max 8 Amps

Accessory power supply: 24 VDC - 750 mA

Operating temperature: -20°C / + 55 °C

Programming parameters: stored in EE-PROM

Function manager: microprocessor with watchdog

24-month warranty
eb: 372685051888