Shipping
Shipping in 2-4 business days
Description
UNIVERSAL MULTIFREQUENCY REMOTE CONTROL
SAPIENS
List of duplicable rolling-code models:
APRIMATIC: Tr2/4, TX2/4M, TM4
BFT: MITTO2/4, TRC2/4, B RCB 2/4, KLEIO TX2/4, RB
BENINCA: To-Go 2/4 WV, T2/4WV, Cupido 2/4, Apple4WV, IO
FAAC: RC
FADINI: Juby small, juby433
GiBiDi: DOMINO AU1600/1610/1680/1810
MHOUSE: TX3, TX4, MT4, GTX4
NICE: SMILO
SEAV: BE HAPPY RS3, RS2, RS1, RH1, RH2, RH3
SOMMER/APERTO: 434.42/868.84 FM
V2: PHOENIX black and red - PHOX 433/868
SAPIENS is a next-generation remote control with a new processor and memory. This technology enables programming of next-generation rolling-code remotes (see compatibility table) and traditional 433.92 MHz fixed-code models, allowing them to be combined in the same device to create a universal gate transmitter.
Easy to program.
Programming is simple and immediate because the remote control buttons are used to learn the codes (there are no switches to set).
Each button on the PANDIS R Full-F2 supports different frequencies as well as different rolling-code and fixed-code formats.
Features:
Copyable frequencies: 434-FM, 433.92, 868, 270-390 MHz
Supported codes: fixed codes, rolling codes.
Number of programmable buttons: 4
Programming type: Self-learning between remote controls and wireless programming from in front of the gate
(without accessing the control unit).
Power supply: 3 V CR2032 lithium button cell battery (210 mAh), included with the remote control.
Accessories included: Keyring carabiner, programming manual.
ROLLING-CODE REMOTE CONTROL FOR GATE OPENING AND CLONING.
1) Press buttons 1 and 3 simultaneously (1 and 2 for FM) for approximately 3 seconds, until the green LED on the SAPIENS changes from slow to fast flashing, then release the buttons.
2) Press and release the button on which you want to memorize the original remote control. The LED lights up steadily and changes from green to orange.
3) Transmit by pressing the desired button on the original remote control from a distance of 10 cm until the SAPIENS LED changes from orange to green and emits 3 slow flashes for fixed codes, some fast flashes followed by 6 slow flashes for compatible rolling codes, or 6 slow flashes for incompatible rolling codes that may be managed as fixed codes. To memorize additional codes, repeat the procedure from step 2 within 3 seconds; otherwise, repeat from step 1.
ROLLING CODE - AUTOMATIC RADIO PROGRAMMING ON THE RECEIVER
Move close to the receiver and press buttons 2 and 4 on the SAPIENS simultaneously. The LED lights up red. Immediately afterwards, press and release the button to be memorized. The LED flashes green to indicate that the automatic activation procedure has started; this will take 25 seconds. Wait for the receiver to activate (gate opening, lights switching on, etc.). The remote control is now memorized.
WARNING: Receivers for models marked with the logo may also have the radio channel disabled. In this case, program the SAPIENS remote controls manually by following the instructions for the original remote control.
N.B. The SAPIENS source code (hidden button) is transmitted as follows: press and release buttons 3 and 4 simultaneously (steady red LED), then press the button whose source code is required within 3 seconds.
24-month warranty
