CARDIN TXC449400 ROLLING CODE 4-channel remote control

Brand CARDIN

Model S449 QZ4

Frequency 433.92 MHz

Number of buttons 4

Coding type Receiver registration

Battery type CR2032

Dimensions 72 x 12 x 34 mm

Battery and instruction sheet included: Yes

Compatibility:
Compatible with various models in the Cardin series, including
S449-QZ1, S449_QZ3, S449-QZ4, S437-2, and S437-4, S449-QZ2, CARDIN S449-QZ2 GREEN OLD

Replacement: Ideal for replacing the previous models TRQ449400 and TXQ449400

The duplication procedure must be carried out near the receiver control unit.

1. Use a pin to press the button in the hole below the

remote control buttons: when the short beep sounds,

release the button on the control unit.

2. Immediately press the button on the working remote control

working: the control unit will emit another short beep.

3. Press the button on the new remote control (to be programmed)

the button to be programmed: the control unit will emit 2 consecutive beeps.

4. After releasing the button, the control unit will emit

a longer beep than the previous ones. Wait at least

wait 10 seconds and try opening the gate using

the remote control just programmed. To duplicate other remote controls,

repeat the procedure from step 1.

If the procedure is unsuccessful or if you

make any mistakes during programming

wait 20 seconds and restart the programming procedure.

programming from step 1.

NOTES:

If the hidden button is held down for too long, the remote control

enters battery-saving mode, operating once every 3

times the button is pressed. To exit this mode, hold down

press the hidden button until the Cardin LED flashes rapidly

24-month warranty