Do you need documentation for this product (installation, configuration, and programming)?
Do you need a direct management contact for large orders?
Do you need help with this product? Contact us
Shipping
Shipping in 5-10 business days
Description
REMOTE CONTROL
BENINCA
TO.GO 2 VA
Remote control for Benincà gates, TOGO2VA, 2 buttons (2-channel),
433.92 MHz frequency, ARC (Advanced Rolling Code).
The new ARC coding represents an evolution of the existing rolling code.
Thanks to the length of the transmitted code, ADVANCED ROLLING CODE coding
(128-bit versus the current 64-bit) guarantees an absolute level of security.
Remote control: Benincà model TOGO2VA
Number of buttons: 2
Button color: yellow.
Housing color: Gray
Frequency: 433.92 MHz - ARC (Advanced Rolling Code)
Coding: Self-learning radio board.
The remote control is supplied with 128-bit coding.
To change the coding type, press buttons 1 and 2 simultaneously for 20 seconds.
After a few seconds, the LED starts flashing to indicate the mode about to be activated:
2 flashes followed by a 1-second pause:
the transmitter is about to be configured as HCS
3 flashes followed by a 1-second pause:
the transmitter is about to be configured as ARC
when the LED lights up steadily, the transmitter has changed mode.
After a few seconds, the LED starts flashing to indicate the mode about to be activated:
2 flashes followed by a 1-second pause:
the transmitter is about to be configured as HCS
3 flashes followed by a 1-second pause:
the transmitter is about to be configured as ARC
when the LED lights up steadily, the transmitter has changed mode.
Remote Learning on One WB/WI Receivers
The procedure must be carried out near the receiver
•Press the hidden button on the stored transmitter, i.e. press buttons T1 and T2 simultaneously
buttons T1 and T2 for 3 seconds (the transmitter’s red LED starts flashing)
• Within 5 seconds, press the button on the already stored transmitter corresponding to the channel
to be assigned to the new transmitter.
• Within 5 seconds, press the button on the new transmitter to be assigned to the selected channel.
• The receiver exits programming mode. Check that the new transmitter is working correctly.
stored transmitter.
The procedure must be carried out near the receiver
•Press the hidden button on the stored transmitter, i.e. press buttons T1 and T2 simultaneously
buttons T1 and T2 for 3 seconds (the transmitter’s red LED starts flashing)
• Within 5 seconds, press the button on the already stored transmitter corresponding to the channel
to be assigned to the new transmitter.
• Within 5 seconds, press the button on the new transmitter to be assigned to the selected channel.
• The receiver exits programming mode. Check that the new transmitter is working correctly.
stored transmitter.
Remote Learning on Receivers Built into Control Units
The procedure must be carried out near the receiver
• Press the hidden button on the stored transmitter (the transmitter’s red LED
starts flashing)
• Within 5 seconds, press the button on the already stored transmitter corresponding to the channel
to be assigned to the new transmitter.
• Press the hidden button on the transmitter to be stored (the transmitter’s red LED
starts flashing)
• Within 5 seconds, press the button on the new transmitter to be assigned to the selected channel.
• The receiver exits programming mode. Check that the new transmitter is working correctly.
stored transmitter.
The procedure must be carried out near the receiver
• Press the hidden button on the stored transmitter (the transmitter’s red LED
starts flashing)
• Within 5 seconds, press the button on the already stored transmitter corresponding to the channel
to be assigned to the new transmitter.
• Press the hidden button on the transmitter to be stored (the transmitter’s red LED
starts flashing)
• Within 5 seconds, press the button on the new transmitter to be assigned to the selected channel.
• The receiver exits programming mode. Check that the new transmitter is working correctly.
stored transmitter.
24-month warranty
eb: 372684981055
