Shipping
Shipping in 2-4 business days
Description
Remote control
RIB
SUN 2CH
2-channel
ORIGINAL
This model replaces the previous RIB MOON ch2 remote control and is 100% compatible
STARTING WITH AN OLD RIB MOON MODEL
1. Open the remote control that is already working
2. The control board has mini switches numbered
1 to 10, set to ON or OFF, which determine the remote control's code remote control
3. Briefly press button 1 on the new remote control release it
4. Within 2 seconds, press the second button and hold it pressed for 5 seconds. Release the button
5. The LED on the remote control lights up steadily and after goes out after a few seconds
6. Transmit the old transmitter's code by pressing the buttons 1 and 2 on the new remote control:
button 1 represents OFF, while button 2 represents ON
7. After transmitting the code, the LED on the remote control
will stay on for 3 seconds to indicate that the procedure has completed successfully
STARTING WITH A RIB SUN
1. Press and release the button programming button on the control board receiver.
(P, PG, PROG, M, REC, CH1, ENR, MEMO)
2. Press and hold the button on the new remote control for 5 seconds
3. Wait 15 seconds and try to activate the automation system for check that it is working correctly
24-month warranty
