Shipping
Shipping in 5-10 business days
Description
NICE INTI 2-CHANNEL ROLLING CODE REMOTE CONTROL
LILAC
Professional
Mod. INTI2L
The Nice INTI2 is a miniature two-button transmitter designed to control automatic gates, automation systems and burglar alarm systems. Featuring a glossy casing on an ABS base that gives it a stylish design, this device combines aesthetics and practicality thanks to its compact dimensions, allowing it to be easily attached to a key ring using the included lanyard.
Despite its compact size, the remote control is designed for ease of use: its buttons are larger than those on other brands' models, making them clearly visible and easy to operate even when wearing gloves. A highly visible red LED confirms that the command has been activated correctly. In terms of security, the device uses 52-bit Rolling Code technology, with 4.5 million billion random combinations to ensure maximum protection.
TECHNICAL DATA:
Frequency: 433.92 MHz
Encoding: 52-bit Rolling Code (4.5 million billion combinations)
Power supply: 3V CR2032 lithium battery (included)
Dimensions: 30 x 56 x 9.5 mm
Weight: 0.025 kg
Range: 50/80 metres in open field
Protection rating: IP40
Materials: Glossy casing on an ABS base
Colours: Black front and buttons, black or white casing
Indicator: Highly visible red LED
Included: Lanyard, battery and instruction sheet
PROGRAMMING INSTRUCTIONS:
1. Place the new remote control (to be coded) and the old remote control (already working with the receiver) facing each other.
2. Press and hold the button on the new remote control (to be coded) until the red LED on the old remote control (already working with the receiver) lights up. Then release the button.
3. Press the button on the old remote control (already working with the receiver) while it is flashing. The LED on the new remote control will light up to confirm successful duplication.
If the procedure above is unsuccessful, follow these instructions:
1. Press and hold for approximately 5 seconds the button to be coded on the new remote control (to be coded).
2. Press the button on the old remote control (already working with the receiver) 3 times in succession.
3. Press and hold the button on the new remote control (to be coded) again for a few seconds.
Wait at least 10 seconds, then try opening the gate using the newly programmed remote control. To duplicate additional remote controls, repeat the procedure starting from step 1.
24-month warranty
eb: 371220399648
