Nice Inti2G Transmitter 2 Channels 433 92 Mhz Green Color Era Inti Remote Control

NICE

INTI

ROLLING CODE

2-channel

Professional

(color is supplied according to warehouse availability)

PROGRAMMING INSTRUCTIONS:

1. Place the new remote control (to be programmed) and the old
remote control (already programmed to the receiver), facing each other.
2. Press and hold the button on the new
remote control (to be programmed) until the red LED lights up
the red LED on the old remote control (already programmed
to the receiver). Then release the button.
3. Press the button on the old remote control (already programmed
to the receiver) while it is flashing. The LED on the new remote
the remote control LED will light up to confirm successful duplication.

If the procedure above does not work,
proceed as follows:

1. Press the button you want to program for approximately 5 seconds
of the new remote control (to be programmed).
2. Press the button on the old remote control 3 times consecutively
old remote control (already programmed to the receiver) again for a few seconds
3. Press the button on the
new remote control (to be programmed).

Wait at least 10 seconds and try to operate the gate
of the gate using the newly programmed remote control. To
to duplicate other remote controls, repeat the procedure starting from
point 1.

24-month warranty