Motor For Adjustable Rolling Shutter With 3 Three Limit Switches 100kg 50nm With Remote Control

Highly reliable actuator with mechanical limit switch, where attention to detail is combined with ease of installation.

The particular care in the design of the motor head has allowed the overall dimensions to be kept to a minimum,

allowing you to operate even in those installation situations where the space available is extremely limited.

Thanks to an innovative coupling system, the assembly of any model in the range becomes extremely quick

and is reduced to a simple snap of the support on the motor head.

Wide range of adapters, accessories and supports that allow any installation requirement to be covered.

CLICK ON THE LINKS FOR THE INSTRUCTION MANUALS:

MANUFACTURER'S INSTRUCTION MANUAL (1 OF 3)

MANUFACTURER'S INSTRUCTION MANUAL (2 OF 3)

MANUFACTURER'S INSTRUCTION MANUAL (3 OF 3)

Rectangular bracket, 60 mm octagonal adapter included in the package

***ATTENTION***

A 50 KG MOTOR CANNOT LIFT A 50 KG SHUTTER, IT CAUSES FRICTION AND INERTIA!

ES. for a 35 kg roller shutter, we recommend a 70 kg motor (approximately double),

so as to have good functioning and reliability over time

STANDARD ROLL SUITABLE FOR THE 60MM OCTAGONAL ADAPTER

Tubular gearmotor for roller shutters.
Mechanical limit switch in opening and closing.
Extremely simple assembly.
230 Vac power supply.

torque: 50nm

rpm 12

n. final laps: 26

time before thermal: 4 min

absorbed power: 232W

absorbed intensity: 1.20 A

Engine length: 57 cm

weight: 3.9 kg

CONTROL UNIT
Characteristics:
- ABS case.
- Radio receiver for remote controls.
- Possibility to connect single button step-by-step functionality.
- 230V power supply

12 CHANNEL REMOTE CONTROL
Characteristics:
- Shutter selection button.
- Selection display
- Ascent and descent command.