Shipping
Shipping in 2-4 business days
Description
Complete Kit for
Up-and-Over Door Automation
Counterweighted
THE IRON ARMS IN THE BAZER UP-AND-OVER KIT MUST BE WELDED
For Intensive Use
Professional
Model BAZER 1M
The Bazer gearmotor is suitable for operating counterweighted up-and-over doors with a maximum area of approximately 9 m².
It has a mechanical release system that allows the door to be operated manually in the event of a power failure.
Supplied as standard with opening and closing limit switches.
It can be fitted with a courtesy light and electronic control unit with slowdown.
For large up-and-over doors, using two gearmotors is recommended.

INSTALLING THIS OPERATOR IS RECOMMENDED WHEN THE SPACE BETWEEN THE DOOR AND THE CEILING IS LESS THAN 10 CM
IF THE DOOR IS MORE THAN 3 M WIDE, THE 2-MOTOR KIT MUST BE INSTALLED.
Features:
Irreversible electromechanical gearmotor.
Opening and closing limit switches.
Built-in release lever.
Electronic slowdown during closing/opening.
Electronic torque adjustment.
Power supply 230 Vac - 50 Hz.
CLICK THE LINKS FOR THE MANUALS:
KIT CONTENTS:
No. 1 230 V electromechanical gearmotor with built-in limit switch.
No. 1 control unit located in the motor housing, with motor force adjustment trimmer and obstacle detector,
Slowdown during opening and closing, 4 operating modes: step-by-step, semi-automatic 1 and 2, automatic for shared premises.
Courtesy light, surge protection, inputs for photocells and safety edges.
No. 1 single-channel radio receiver built into the control unit (433.9 MHz)
No. 1 antenna built into the control unit, range 20 metres (433.9 MHz)
No. 1 4-channel remote control
No. 1 kit with 2 straight arms,
No. 2 drive shafts
No. 1 1.50 m galvanized crossbar
No. 1 internal emergency release
No. 1 set of screws and mounting brackets
No. 1 instructions for assembling the mechanical and electronic components in ITALIAN
eb: 254285668914
