Shipping
Shipping in 2-4 business days
Description
Complete automation kit
Up-and-over doors
Counterweight
Intensive use
QUICK-INSTALLATION SYSTEM
Professional
+ OBSTACLE DETECTOR
+ OPTICAL ENCODER
Model UNIKO 100 kg
At the forefront of technology, UNIKO is a modern-design electromechanical ceiling-mounted operator for spring or sectional doors.
Available in two models:
For residential use (UNIKO 60).
For condominium use (UNIKO 100).
This product combines advanced technology with numerous advantages:
Compact dimensions (360 x 200 x 120 mm).
Installation time reduced by 40%.
Base made of robust plastic material, reducing the operator's weight and making it easier to handle.
Designed for use with low-energy lamps.
MOTOR POWER SUPPLY 24 Vdc
MAX THRUST 1000 N
MAXIMUM DIMENSION CAPACITY 14 SQ M
MOTOR SPEED 200 RPM ENCODER
AVERAGE CURRENT DRAW 1.2 A
SPROCKET X1/8 Z9 PITCH 8 Z12
NOISE LEVEL < 30 DBA
OPERATING TEMPERATURE -20/55°C
IP30 PROTECTION RATING
PATENTED THREE-STEP INSTALLATION:
UNIKO can be installed on the designated rail in three simple steps, without using tools.
1-Mount the support plate on the rail by tightening the two bolts and securing the lower section.
2-Take the operator, fit the shaft and turn.
3-Insert the pin.
To disassemble it, simply use a screwdriver to push out the pin.
CLICK THE LINKS FOR THE PDF MANUALS:
MANUFACTURER'S MECHANICAL COMPONENTS MANUAL
MANUFACTURER'S ELECTRONICS MANUAL
HANDLE RELEASE MANUAL
KIT CONTENTS:
No. 1 24 V low-voltage gearmotor kit, max. capacity 100 kg, built-in limit switch.
No. 1 Control unit housed in the motor casing, with motor force adjustment trimmer and ENCODER, slowdown during opening and closing, 4 operating modes: step-by-step, semiautomatic 1 and 2, automatic condominium mode. Courtesy light, overvoltage protection, inputs for photocells, safety edges and backup battery.
No. 1 Single-channel radio receiver built into the control unit (433.9 MHz)
No. 1 Antenna built into the control unit, range 30 metres (433.9 MHz)
No. 1 4-channel ROLLING CODE remote control
No. 1 Sliding rail made of treated aluminium with 3 m chain
No. 1 Pair of photocells
No. 1 Flashing light with wall bracket
No. 1 External emergency release
No. 1 Internal emergency release
No. 1 Courtesy light
No. 1 Oscillating arm for counterweight doors
No. 1 Set of screws and brackets for installation
No. 1 Instructions for installing the mechanical and electronic components in ITALIAN
