Shipping
Shipping in 5-10 business days
Description
Barrier consisting of 1 pair of microwave beams + 4 IR beams, 4TX and 4RX, dual optics, H 200 cm. 230V power supply
Mod. MANA DT SMA 20250 4X
SKU: MANA DT SMA 20250 4X
The MANA range of barriers, with a range of 1 to 250 metres, is designed for the outdoor protection of large sites. It can be configured to suit installation requirements and the required security level, with microwave-only, active infrared-only or dual-technology operation. Each section has an independent alarm output, which can be managed in AND or OR mode directly by the alarm control panel. The robust aluminium structure has a protective polycarbonate screen and is mounted on a base designed for installation on the floor or in a pit, or, on request, on a wall using the relevant accessories. 230V power supply.
MANA DT SMA is a dual-technology IR and MW barrier featuring SMA (single man alignment) technology, making it ideal for sites with long perimeters where a higher level of security is required. MANA DT SMA can be controlled via an RS-485 bus connected to the ADEBUS control panel, enabling remote control of each device in the field. Built-in power supply and an exceptional dual-technology operating range of 1 to 250 m. The IR and MW sections each have separate outputs for independent management (OR or AND). The K-band microwave allows the barrier to be used in narrow corridors with a maximum beam width of 4 m.
Outdoor range: 10-250 m
Indoor range: 1-500 m
Dual-beam optics: with 35 mm lenses in AND mode
Microwave frequency: 24GHz with 4 switchable channels
Microwave beam width: 4m
Synchronization: wired - optical
Photodetectors: Pulsed beams with a wavelength of 950nm
Aiming system: SMA optical-acoustic technology; electronic IR aiming; ON BOARD MW display
Beam arrangement: Parallel or crossed
Dual-beam configuration: 2-3-4 TX / 2-3-4 RX
Beam configuration in terminal column: \
Optics adjustment: 180° horizontal, 20° vertical
MW sensitivity adjustment: ON BOARD, alarm threshold \ detection mass
IR detection system: OR- AND RANDOM on board or remotely configurable
Beam exclusion: 1st or 1st and 2nd beam on board or remotely configurable
Anti-crawl function: configurable ON Board
IR response time adjustment: 50-500ms with trimmer
Circuit power supply: 230 Vac with built-in linear power supply + toroidal transformer
Circuit current draw: 250 mA
Heater power supply: 24Vac, internally powered
Heater current draw: 45W - 150W depending on the number of beams and height
Battery compartment: 12V 7Ah max battery
Operating temperature: -25°C / + 70°C
IR alarm output: Relay with volt-free NC contacts (on RX column)
MW alarm output: Relay with volt-free NC contacts (40 ohm on RX column)
Tamper output: Column opening tamper (on both columns)
Fog disqualification output: Dedicated OC: NO to GND
IR anti-masking output: Dedicated OC: NO to GND
RS-485 output (only with wired synchronization): Local and remote control with the Adebus system
Environmental class: 4
Material: Black polycarbonate screen, transparent to IR. Reinforced anodized extruded aluminium profile
Profile dimensions LxDxH: 250 mm x 200 mm, from 1000 to 4000 mm, on a round base with a diameter of 300 mm. A dedicated base and accessories for pole or wall mounting are available on request
24-month warranty
