Shipping
shipping in 10 working days
Description
Barrier composed of 1 pair of microwaves + 2 IR beams 2TX and 2RX with double optics H 150 cm. 230V power supply
Mod. MANA DT SMA 15250 2X
SKU: MANA DT SMA 15250 2X
The MANA line of barriers with a range from 1 to 250 metres, designed for the external protection of large sites, can be composed and configured according to installation needs and the required level of safety, microwave only, active infrared only or combined in dual technology, where each section has an independent alarm output, manageable in AND or OR directly from the alarm control unit. Sturdy aluminum structure with protective polycarbonate screen, fixed on a base designed for installation on the floor, on a well or on request on the wall with its accessories. 230V power supply.
MANA DT SMA is the dual IR and MW technology barrier that supports SMA (single man alignment) technology, making it the ideal barrier for places characterized by long perimeters where a higher level of security is required. The management of MANA DT SMA can be carried out via RS-485 BUS which connects to the ADEBUS control unit for remote control of each device in the field. On board power supply and extreme action range from 1 to 250m with dual technology. Each IR and MW section has separate outputs for independent handling (OR or AND). The K-band microwave allows its use even in narrow corridors with a maximum lobe width of 4m.
Outdoor range: 10-250 m
Indoor range: 1-500 m
Double beam optics: with 35 mm lenses in AND
Microwave frequency: 24GHz with 4 switchable channels
Microwave lobe dimensions: 4m
Synchronization: wired - optical
Photodevices: Pulsed type rays with a wavelength of 950nm
Pointing system: SMA optical-acoustic technology IR Electronic on display ON BOARD MW
Spoke arrangement: Parallel or Crossed
Double beam configuration: 2-3-4 TX / 2-3-4 RX
Configuration of spokes in terminal column: \
Optics adjustment: 180° horizontal 20° vertical
MW sensitivity adjustment: ON BOARD, alarm threshold \ detection mass
IR detection system: OR-AND RANDOM on board or remote
Beam exclusion: 1st or 1st and 2nd beam on board or remote-controlled
Anti-crawl function: configurable ON Board
IR intervention time adjustment: 50-500ms with trimmer
Circuit power supply: 230 Vac with linear power supply + on-board toroid
Circuit consumption: 250mA
Heater power supply: 24Vac internally powered
Heater absorption: 45W - 150W based on the number of beams and height
Battery housing: 12V 7Ah battery max
Operating temperature: -25°C / + 70°C
IR alarm output: Relay with free Nc contacts (on RX column)
MW alarm output: Relay with NC free contacts (40 ohm on RX column)
Anti-tamper output: Column opening tamper (on both columns)
fog disqualification output: dedicated OC: NO to GND
IR anti-masking output: Dedicated OC: NA to GND
RS-485 output (only with wired synchronism): Local and remote control with Adebus system
Environmental class: 4
Material: Black and IR transparent polycarbonate screen. Reinforced anodized aluminum extruded profile
Profile dimensions WxDxH: 250 mm x 200 mm from 1000 to 4000 mm on a 300 mm diameter round base, on request it is supplied with a specific base and accessories for fixing to a pole or wall
24 month warranty
